Your top hose of the radiator should go the thermostat housing. The bottom hose should go to the water pump housing.
A cooling system diagram for the hoses of this car can be found in its maintenance manual. It can also be found in the repair manual.
but a chilton manual for it.
If you are wanting to see hose routing, then go to the dealership parts dept and ask them to bring up the pictures of the hoses on their computer and print it out for you. Other than that, I dont know what you mean by diagram. I have been working on cars for 20 years and have never seen a cooling system diagram specific to a particular car. There are only generic ones that I know of.
The cooling system diagram for a 1996 Pontiac Sunfire can be found in its manuals. It can also be obtained as a print out at an auto part store.
Only when there is a failure in the cooling system.Only when there is a failure in the cooling system.
cooling system capacity, 1997 gmc 5.7 liter engine
Under the hood neat the top of the radiator on the right as you look at it.
need a diagram of vaccum hoses for a 1986 Toyota celica gts w/a 2 liter eng.
The cooling system bleed valve, on your General Motors 5.7 liter engine, is located on the bottom of the radiator. The bleed valve should be in the middle of the radiator bottom.
The 2004 Chevrolet blazer 4.3 liter engine cooling system has a capacity of 4.7 gallons. The cooling system should contain a minimum of 50 percent antifreeze.
According to my Chilton's auto repair manual : For a 1987 Chevrolet Celebrity with the 2.8 liter V6 engine : ( the engine cooling system capacity is 12.6 U.S. quarts )
Reaching the water pump of a 5.2 liter Dodge Ram requires removal of the engines serpentine belt, heater hoses, several components as well as draining of the coolant. After replacing the water pump it is recommended to flush the coolant and rid the cooling system of any air pockets.