Loosen the tensioner pulley on your 1992 Buick LeSabre. Take the serpentine belt off. Put the new serpentine belt on and tighten it down with the tensioner pulley.
passenger side - under dash - way up to the right side there are about 8 relays there.
not enought fluid pressure, mis ajusted linkage,you need to ajust the ban tension in the trans, that wold be my gess
You shouldn't even think of doing that. Just replace the switch.
NOT A J0B FOR THE INEXPERIENCED UNLESS you have a lift and jacks to remove the trans. Get a manual on it if you want to do it though.
Looking from the front of the engine , the alternator is bolted to the front of the engine in the upper left . It is driven by the serpentine belt and is located between the oil fill cap and the big rubber air intake tube.
there is a rattling noise in the area of the serpentine bell
It is important to know the cost of replace the parts of a car while owning it. The average cost to replace brake pads and rotors to a 1992 Buick LeSabre as a kit would be about $300.
If it is the same 3800 engine as the 1993 Lesabre--very simple. Alternator is right on top of the engine. Loosen the serpentine belt ( tensioner) - remove the mounting bolts that hold the alternator on the bracket- remove the wire connections.
The 3.8 litre V6 engine in a 1992 Buick LeSabre has a timing CHAIN
replace the combination switch on the turn signal stalk
Yest, the Buick LeSabre from 1992-1994 is the same exact car, inside, outside, underside. Everything is identical, except say for the trim packages and options you get on them. Therefore, yes the cassette radio from a 1992 LeSabre will work in a 1994 LeSabre.
A 1992 LeSabre wouldn't have a valet switch
Yes, the 1992 Buick LeSabre does have driver side air bags. the air bags were standard in all the Buick cars that year.
Custom is lower end. Limited has more features.
how to replace a serpentine belt on 1992 grand am 2.3l