Respiratory rate is indeed a function of temperature. Insects are generally ectothermic and as such rely upon external heat sources; mice are endothermic and have more developed mechanisms to regulate and maintain higher body temperature in the cold.
Note that some insects are capable of regulating temperature in colder weather by behavioral or other physiological means; some flight-capable insects, for example, use muscles to keep their thoracic segment warm before flight.
The temperature of the magma will affect its viscosity depending on its chemistry. Some minerals crystallize at higher temperatures than others, meaning that portions of the magma may have already solidified. At lower temperatures, the majority of the constituent minerals will have crystallized and solidified, leaving the magma highly viscous.
Various types of clay are used.Earthenware tends to have larger amount of iron oxide. It can't be fired to very high temperatures as the iron oxide would act as a flux and the pottery would sag Stoneware can be fired to higher temperatures. It is opaque and fairly waterproof when fired.Porcelain can also be fired to high temperatures, it vitrifies and becomes very hard, even glassy.There are as many variations between clays as there are bags of clay, but most fall into these categories
Frogs are insectivores.
Porcelain is generally more durable than terra cotta due to its higher density and lower porosity. Porcelain is fired at higher temperatures, which makes it denser and less susceptible to chipping and cracking. In contrast, terra cotta, being more porous, is more prone to damage from moisture and temperature changes. Thus, for durability, porcelain is the superior choice.
Ceramic kilns fire to many different temperatures for the various types of clay and glazes. We use pyrometric cones to determine the correct firing of items. Clays and glazes are usually designated as Low fire or High fire. Low fire cones start at 022 or approximately 1094 F and most low fire ceramics are fired at cone 06 approximately 1911 degrees F. High fire pottery is generally fired from cone 5 or 2205 F to cone 10 which is approximately 2381 degrees F. Industrial ceramics may use much higher temperatures than a hobbyist kiln.
Anaerobic respiration can be affected by changes in temperature. In general, lower temperatures can slow down the rate of anaerobic respiration, while higher temperatures can speed it up. However, extremely high temperatures can denature enzymes involved in anaerobic respiration, leading to a decrease in its efficiency.
Usually, the higher the temperature the faster enzymes react and the quicker a reaction moves forward, however, if the temperature gets too hot, it can denature the proteins involved in the reaction.
The hypotheses being tested are the effect on the respiration rate. In this case the two are warm temperature vs. cold temperature & germinating vs. non germinating. (temperature & germination)
The zebra fish will have a higher respiration rate
In general, most solids are more soluble at higher temperatures than at lower temperatures. However, there are exceptions such as cerium sulfate, which follows the opposite trend and is more soluble at lower temperatures than at higher temperatures.
Heat.
heat
Particles in matter move more slowly at lower temperatures because they have less thermal energy. Conversely, particles move more quickly at higher temperatures due to the increased thermal energy they possess.
The temperatures at the equator tend to be higher because the equator receives more direct sunlight.
No, molecules at higher temperatures move more quickly than those at lower temperatures. Higher temperatures provide molecules with more kinetic energy, causing them to move faster.
No, in Celsius temperature scale, lower temperatures are colder and higher temperatures are hotter.
depends where you live because you might have higher temperatures where you live where as i might have lower temperatures than laos or poland