answersLogoWhite

0

A lot of times people hear a ticking from the 10v's, turbo or N/A. Some times people will make a false diagnostic of the problem and replace the lifters with no avail. I have had many 5000 turbos and found the problem can some times be loose exhaust manifold nuts. After replacing the head with a brand new unit and torqing the manifold nuts to spec i have had to go back and do it a few more times. The exhaust gases blowing by the loose manifold sound like a popping or a ticking similar to the sound of bad or failing lifters This may be caused from the manifold expanding or contracting while going through heat cycles.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What engines bolt down in a 1987 Audi 4000cs Quattro?

Any of the Audi or Volkswagen Inline 5 cylinder engines will bolt up to the stock 5 speed manual AEC gearbox. This is a list of the most common motors found in the North American cars. JT 2.2L SOHC 10V (factory 4000CS Quattro) NG 2.3L SOHC 10V MC1 2.2L SOHC 10V turbocharged MC2 2.2L SOHC 10V turbocharged 7A 2.2L DOHC 20V 3B 2.2L DOHC 20V turbocharged AAN 2.2L DOHC 20V turbocharged


What is the answer to -10v plus 6v?

It is: -10v+6v = -4v


What is the factor of 100v squared - 220v plus 121?

100v2 - 220v + 121 = (10v - 11)2


What is the rms of 10v?

The rms of 10V is 6.02V. Take the peak voltage of the sine wave and multiply it by 0.707.


A model rocket was launched to an altitude of 54 925 feet how many feet above 10 miles did it travel?

h + vt -4.9t^2=54925 10+10v-4.9(10)^2=54925 500+10v=54925 10v=54925-500 10v=54425 v=5442.5


What is the product of 10v - 5 and the multiplicative inverse of -5?

The multiplicative inverse of -5 is -1/5. To find the product of (10v - 5) and (-1/5), you multiply: [ (10v - 5) \times \left(-\frac{1}{5}\right) = -\frac{10v}{5} + \frac{5}{5} = -2v + 1. ] Thus, the product is (-2v + 1).


Is there an ECU on a Audi 90 10v K-jetronic KV engine code?

YES: It is located between the firewall and the heater box. To access, remove lower dash covering behind glove box, and pull ECU down toward floor.


How do you factorize 10v 12u?

2(5v + 6u)


Can you use a universal ac adapter set at 9v for a scanner that requires 10v?

It's not likely that you will be able to draw enough power for the 10v device, as you have probably found out by now.


Does the dell mini 10v have internet?

ItDoes Not come with Internet but you can get it.


Does the dell mini netbook 10v have usb ports?

it has three


Can you put two 5v voltage regulators in series to get 10v?

No, you cannot put two 5V voltage regulators in series to obtain 10V. Voltage regulators are designed to maintain a constant output voltage regardless of the input voltage, and connecting them in series would not sum their outputs as you might expect. Instead, it could lead to instability or damage to the regulators. To achieve 10V, it's better to use a step-up (boost) converter or a dedicated 10V regulator.