0
I have not taken one off a 74 specifically but every one I have done required a Gear Puller. The puller will bolt to the Harmonic Balancer and the center bolt sets on the head of the Crank Shaft bolt. As you turn the center bolt in it will pull the balancer off.
You'll need to pull the big nut in the middle, then use a wheel puller or balancer puller.
there is a speacel tool called a harmonic balancer puller, you can pick one up at your local carquest.
Add your answer:
Earn +20 pts
Where is the crank positioning sensor located on a Ford F150 with a triton v8?
in the front on side of the harmonic balancer
How do you remove harmonic balancer off 2001 Ford Focus?
You need a pulley puller.
What way does the harmonic balancer bolt turn on a 61 ford 170ci 6cyl to remove?
Counterclockwise
How do you remove the Harmonic Balancer on a 1994 Ford Tempo GL?
Works best with a air impact tool. There is room.
How do you take off the harmonic balancer on a 1988 Ford Ranger?
Pull the belts, remove the center retaining bolt then use a harmonic balancer puller to remove the pulley. Make sure you use a disk that will protect the threads of the cranshaft when you tighten the puller.
How do you install harmonic balancer in 1978 ford truck?
First remove the old one using a puller that you screw into the harmonic balancer there is a key on it so you can not put the new one on wrong just use the bolt that holds the main pully on to push the balancer on
Where are the timing marks on 1980 ford courier?
on the harmonic balancer, at crank shaft
What would cause an engine vibration when in drive at a stop light on a 1996 Ford Contour 2-liter Zetec with automatic transmission?
check harmonic balancer. check harmonic balancer.
What is the torque setting for the harmonic balancer for an AU series 2 ford?
6cyl is 125nm
How do remove the harmonic balancer on a 1996 ford ranger xlt 2.3?
After removing the bolt, use a large gear puller. Tighten the puller, tap the head with a hammer, then tighten again. After a few repetitions the balancer will break free.
What are torque specifications for 1982 Ford 302 harmonic balancer?
75 lbs 75 lbs
Where is the timing mark on 1982 ford F-150?
on the timing cover above the harmonic balancer leon
