The 1988 Buick Skylark 2.3 liter engine serpentine belt tensioner pulley is held in place with a single retaining bolt. The retaining bolt will be in the center of the pulley. Remove the retaining bolt.
I went through the wheel well and had to slightly drop the engine to gain better access. Not as had as it seems. Getting the belt back on is the hardest part.
you will need to remove engine mount on passenger side of the car that is it.then push belt tensioner toward to the car it will release belt.
you dont.....have some one else do it fool....god people these days.
Where does the camsensor go on a 1997 buick lesabre
how do you replace the fuel pump on a 1997 buick lesabre
Remove the positive cable from your 1997 Buick LeSabre battery. Remove the alternator belt. Remove the alternator wiring harness. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
The P0336 fault code on 1997 Buick Lesabre is a fault in the crankshaft position sensor circuit.
probably. go for it.
The 1997 Buick LeSabre is a mid-sized four door sedan. The vehicle retails for about 1000 dollars to about 6000 dollars depending on condition.
1997, 98 and 99 lesabres are supposed to bigger inside so check with a dealer or wrecking yard.
118 ft lbs 1997-2004 Buick LeSabre
4
5.25"
Remove belt and tensioner should just be bolted to engine
If you need to remove side view mirror: you need to remove door panel and there should be 3 nuts securing mirror to door.