To remove the rear cup holder on a 1998 Toyota Corolla LE, first remove the seat. Then remove the four bolts holding the cup holder housing.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
Go to the nearest mechanic he'll help you out :D LOL
To remove the rear seat from a 1996 Toyota Corolla, start by locating the seat bottom release clips, usually found at the front of the seat. Pull these clips up to detach the seat bottom from its mounting points. Next, for the seat back, locate the bolts or clips securing it to the floor or rear bulkhead, usually accessible from the trunk or rear passenger area. Once unfastened, simply lift the seat back up and out of the vehicle.
Remove the rear seat, there should be an access cover underneath it
it is on the back of the seat. remove the seat and remove the black cover on the middle. the pump and the filter are together.
ANSWERIt is under the rear-seat on the Driver's side. Pull up on the front of the seat in it should release. Remove the seat and you will see an access panel with a wire coming out of it. There are four screws to remove this cover.
To remove the passenger side front seat belt in a 1999 Toyota Corolla, first, ensure the vehicle is turned off and the seat is in a forward position. Locate the seat belt anchor bolt at the base of the B-pillar and use a socket wrench to remove it. Next, detach the seat belt from the retractor mechanism by accessing the rear side panel if necessary and unbolting it. Finally, pull the seat belt free from its guides and clips.
The fuel filter for the Corolla 1.8L is located inside the fuel tank. Remove the lower portion of the rear seat to expose a cover. Remove the cover and pump/filter assembly to gain access to the filter.
There should be a bolt at each corner of the seat. Remove and lift seat out
Look under the frigging seat. There are nuts or bolts on the brackets under there holding the seat to the floor. It is up to you to remove the right bolts.
How do you remove seats in a 2007 Camry SE