31 inch pounds + or minus 4
To change the expansion valve on a 2007 Mitsubishi Endeavor, first, ensure the vehicle is off and the AC system is discharged to prevent refrigerant leaks. Remove the dashboard or access panel to reach the AC evaporator unit, then disconnect the lines attached to the expansion valve. Unscrew the old valve and replace it with the new one, ensuring all seals are in place. Reassemble the components, recharge the AC system, and test for proper operation.
If it is white smoke, you probably have a blown headgasket as coolant is leaking in the heads ans being vaporized. If it is black smoke, then you have worn rings and oil is leaking into the chamber and is being burnt. and if its blue it could be the valve steam seals you will need an air compressor a compression tester valve spring removing tool and a little bit of elbow grease
The solenoids in that Mitsubishi transmission are internal. They are on the valve body.The solenoids in that Mitsubishi transmission are internal. They are on the valve body.
You can find the PCV valve for your 1997 Mitsubishi Montero on top of the engine. The PCV valve will be in front of the air cleaner housing.
The EGR Valve on the 1996 Mitsubishi Galant is located underneath the Exhaust Manifold.
It is in the valve cover.
Tappet setting on mitsubishi canter 4d30
The EGR valve, on your 2005 Mitsubishi, is located beneath the air cleaner. Remove the air cleaner housing. The valve should be visible and labeled.
one per valve
What is the valve adjustment mistubishi 4d36
A bad PCV valve can cause the engine to smoke. The valve is easy to change in most engines to correct the problem.