factory Honda wheels won't fit. the center hole is too small.
Screwed onto the engine block.
On the Bracket for sure
Condensation from air conditioning?
No. They are a different lug pattern.
It's bolted onto the bell housing of the transaxle- it would be hard to miss.
Follow the upper radiator hose to the block, and it clamps onto a [thermostat] housing, remove the hose and that housing the there you go!
no it will not slightly longer.
Yes you can mount this engine into a golf cart but you will have to reconfigure the way the engine mounts onto the frame. It's not a direct fit.
Most Honda brake rotors require a large slide hammer as they are not only pressed onto the hub, but also rusted which makes it very hard to remove. This may well require an experienced technician.
It is probably a 19mm. The best way to find out is to go to the parts/hardware store and thread the lug nut onto a bolt and which ever size bolt it fits that will be the size of the lug nuts.
Grab onto the head with the biggest pair of vise grips you have. Pull down on the pliers, then turn them counterclockwise to remove the bolt.