answersLogoWhite

0

SCSI or HDMI cables are used for connecting your DVR.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you hook up a DVR when you have a satellite TV box?

The following procedure may vary, depending on if you have Dish Network or DirecTv. Connect one or two tuners to the "satallite in" on your DVR. Two is necessary in order to record two shows at once. Then, if you are working with standard definition, connect a yellow composite cable as well as two RCA audio cables to the TV and DVR. If you are working with High Definition, connect a set of component cables (blue, green, red) as well as two RCA audio cables to the DVR and TV. Also, you can connect an HDMI cable to the TV and DVR, which allows for HD video and audio to your tv with one cable. For more info on these cables and what they do, go into your local electronics store. Hope this helps and good luck!


How can one install a colour CCTV camera in one's home?

To install a color CCTV camera a person should first find a good location for the camera. Next power and video cables would need to be ran. Next a person needs to find a point of entrance into the home and run the cables through that entrance. The next step would be to allocate a spot for the DVR and the monitor and run all cables to that one spot from the point of entrance. The last step is to connect the cables to power and then connect to the monitor and DVR.


Will the Lorex SG7965 connect to my security dvr system?

The Lorex will connect to your security DVR system, and will be a good choice for making backups.


Can you connect the HP Touchsmart Iq804 to a time warner hd dvr?

If the operating system is compatible you will be able to connect the Touchsmart to a HD DVR unit.


How do you connect HDMI to my DVD recorder?

Not all DVD recorders (DVRs) have an HDMI connection. If yours does not have one, then you cannot use an HDMI cable. You will have to use either Component (5 wires) or Composite (3 wires) cables to connect your DVR to your TV.


How do you connect a dvdvcr combo to a DirectT DVR box?

Connect a coaxial cable to the "out to TV" input on the back of your DVR, and then hook up the other end to your TV's "RF In" input. For slightly better picture quality, you can connect composite or S-Video cables from the back of your DVR to the DVD VCR Combo. Newer models have two audio and video connections. Hope this helps and good luck!


How do you get video off your DVR and onto a DVD?

You can connect the output of your DVR in a DVD recorder, such as the Samsung DVD-VR375. This will record your DVR programs directly to DVD.


Can you connect a DVR to an antenna?

Only TiVO brand DVR's are capable of that feature at this point in time. Hope this helps!


Can I rig my DVR to record video from a security camera?

Yes, you can get your DVR to record video from a security camera and it's a great option particularly because DVR's have a much greater memory capacity. DVR's can be used with USB or video output cables.


Can you connect over the air digital tv signal to dvr?

Yes, simply connect it to the "off air ANT." cax input on the back of your DVR unit. Hope this helps.


How do you connect wii to cable dvr .I have comcast cable service and a dvr player?

Generally, you can't connect the output of a games console to a cable or satellite DVR. The DVRs normally don't have a video input and are built to record content only from the the broadcaster.


Where can you get help with your DVR hardware?

If you need help with your DVR hardware, visit your DVR manufacturer