0
1990 300ZX non turbo lights warning lamp comes on when pressing on brake pedal but all brake lights work fine anyone know why?
It didn't work for me but check for corrosion on the third break light bulbs connections. check fluid level in resevoir. <><><><><><><><><> I had a similar problem. I found a broken connection on the circuit board in the stop and tail light sensor, located on left side rear cargo area.
What else can I help you with?
Why do most of your warning lights fade in and out while the engine is running on your 86 300zx non- turbo?
It is an over charging votlage regulator in the alt. Rare problem.
What does the HICAS warning light mean on your Nissan 300zx twin turbo?
four wheel steering warning light
Anyone have the intake torque specs for a 90 300zx non turbo?
look up 300zx manual on net it has all specs.
How do you remove the complete headlight on a 90 300zx?
A 1990 300zx headlight is recessed into the bumper. To remove it, first loosen the headlight bracket bolts. Unplug the lights and push the housing outward. Be careful not to ruin the weather stripping for the lights.
What runs all lights on a nissan 300zx?
The alternator when the engine is on, and the battery when the engine is off.
300zx running lights work but the brake lights wont?
Check bulbs they are double filamented smaller for brake lights larger for tailights Check the fuse Check the operation of the stoplight switch
Where is relay for the lights located on a 1986 Nissan 300ZX?
UNDER THE HOOD IN THE FUSE BOX 2 FOR EACH LIGHT
How do you fix the dashboard lights on a 1987 Nissan 300ZX?
Until you say what is wrong, I recommend using a sledge hammer.
Brake lights constantly on 1984 300zx?
More than likely the brake light switch is defective or out of adjustment.
Why would parking lights stay on even after they've been turned off on a 1990 Nissan 300zx Front marker lights stay on as well.?
faulty hdlmp switch
Why does your warning light for cooling system stay on on your 1984 Nissan 300zx?
You are low on coolant or the low coolant sensor/wiring/connection is bad.
Did Anyone had trouble with peeling clear coat on a 1993 300zx?
yes, only on the driver's side t-top
