0
What else can I help you with?
Honda foreman four wheeler will not start will turn over no fire at plug have replaced spark plug and coil?
burn it
Honda recon 250 spark plug gap size?
.035 gap. DPR8ea-9 spark plug
What do you look for when you have no spark on your 1984 Honda 4 wheeler?
the ground-wire
What spark plug for a 1986 Honda 4trax 250 4-wheeler?
SPARK PLUG (DR8ES) (NGK) SPARK PLUG (X24ESR-U) (DENSO)
What spark plug for a 1987 Honda 250X 4-wheeler?
NGK Makes Really Good Spart Plugs.
Replaced spark plug and spark plug wires on Honda civic 1999 but still misfiring?
check the gappings of your spark plugs, it must be uniform.
How do you remove a spark resistor from a 1990 Honda four tr-ax four wheeler?
you remove the spark arrestor by taking the little screws that are at the end of the tip then yank it out with pliers
What type of spark plug does a Honda atc 200s 3 wheeler take?
Takes the same size as a 185. DR8ES-L
Where is the spark plug at on a 1997 Honda 250?
Depends on what we are talking about. There is the Honda Recon 250 ATV with a single cylindar engine, the spark plug is located at the cylinder head. The Honda Hornet motorcycle is a 4 cylindar bike with the spark plugs at the side of the cylinder heads. Then there is the single cylindar Honda Nighthawk 250 one cylindar motorcycle with the spark plug located at the side of the cylinder hear. The spark plug is easily located on any vehicle as it is visible by a thick wire and a (usually) rubber spark plug cap.
What does code p1399 mean for a 1997 Honda Accord?
This is a Honda only code which means you have a random cylinder misfire. If you have not replaced the Spark Plugs & Wires, do so now. Use OEM spark plugs.
Where can you find information on 1986 Honda 200S 3-wheelers?
if the spark plug always need to be replaced
Where is the spark plug located on a Honda rancher 350 four wheeler?
The spark plug on a Honda Rancher 350 four-wheeler is located on the side of the engine, beneath the seat and fuel tank. To access it, you typically need to remove the seat and possibly the side panels for better visibility and reach. The spark plug is screwed into the cylinder head, and you can identify it by the thick ignition wire connected to it. Always ensure the engine is cool before attempting to change or inspect the spark plug.
