answersLogoWhite

0

You have to Jack up the car, and reach above the rear end , remove the 2 clips holding the fuel lines and give them a slight twist and pull. This will remove the hoses. Then you will have to remove the hoses and straps and wiring in the trunk, in order to remove the tank.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

Where is the fuel pump on a 1991 jaguar sovereign?

On a 1991 Jaguar Sovereign, the fuel pump is located inside the fuel tank. To access it, you typically need to remove the tank from the vehicle, as the pump is not externally accessible. It's advisable to refer to the vehicle's service manual for specific instructions and safety precautions when performing this task.


How do you remove the gas tank in a 1991 Jaguar XJ6 sovereign?

You have to Jack up the car, and reach above the rear end , remove the 2 clips holding the fuel lines and give them a slight twist and pull. This will remove the hoses. Then you will have to remove the hoses and straps and wiring in the trunk, in order to remove the tank.


How do you remove 1991 jaguar xjs fuel tank?

you must remove all the trunk carpet and under the back window you will see the tank remove the two straps vaccum lines and hoses then lift the car and remove the fuel lunes then the tank should come loose


How do you remove fuel tank in 1992 jaguar xjs v-12?

yes


How do you remove a gas tank from a 1999 jaguar XK8?

To remove the gas tank from a 1999 Jaguar XK8, first ensure the vehicle is securely lifted and supported. Disconnect the negative battery terminal, then drain the fuel from the tank and remove the fuel filler neck. Next, disconnect the fuel lines and electrical connectors, and unbolt the tank straps. Finally, carefully lower the tank from its position and remove it from the vehicle.


How do you remove a gas tank on a 1991 firebird?

You have to remove the intermediate exhaust pipe, the muffler, and drop the rear differential to remove the gas tank. gas tank must be removed


How do you remove the gas tank on a 2002 Jaguar XJ8?

To remove the gas tank from a 2002 Jaguar XJ8, first ensure the vehicle is safely elevated and supported. Disconnect the battery to prevent any electrical issues, then drain the fuel tank. Remove the fuel filler neck and disconnect the fuel lines and electrical connectors from the fuel pump. Finally, unbolt the tank mounting straps and carefully lower the tank from the vehicle.


How do you remove a 1999 jaguar xj8 fuel tank?

To remove the fuel tank from a 1999 Jaguar XJ8, start by disconnecting the negative battery terminal for safety. Next, relieve fuel system pressure, then drain the tank if necessary. Support the tank with a jack, remove any straps or bolts securing it, and disconnect the fuel lines and electrical connections. Carefully lower the tank from the vehicle, taking care not to damage any surrounding components.


How do you Remove the Fuel tank on Jaguar Vanden Plas?

Try using tools...if that doesn't work, crowbar


Where is the fuel pump relay on a 1993 Jaguar Sovereign?

the fuel pump is in the gas tank. located on the top of the tank. The relay in my 92 is under the hood, drivers side, right in front of the firewall, about 2 feet from the fender.


How do you remove expansion tank on 1989 jaguar?

To remove the expansion tank on a 1989 Jaguar, first ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant from the system to avoid spills, then detach any hoses connected to the expansion tank. Finally, unscrew any mounting bolts or clips securing the tank and carefully lift it out. Be sure to replace any gaskets or seals when installing a new tank.


How do you remove left fuel tank on a 86 Jaguar XJ6?

To remove the left fuel tank on a 1986 Jaguar XJ6, first ensure the fuel is drained and disconnect the negative battery cable. Remove any protective covers and disconnect the fuel lines and electrical connectors from the tank. Then, unbolt the tank from its mounting points and carefully lower it from the vehicle, ensuring no additional components are attached. Finally, inspect the tank and surrounding areas for any damage or corrosion before installation of a new tank or reassembly.