answersLogoWhite

0

Install a test light in series with battery. If there is a current flow light will illuminate. Remove 1 fuse at a time until light goes out that will determine which circuit is drawing current. Then you can trouble shoot that circuit. May be concealed light i.e. glove box is left on. Could also be voltage regulator circuit is not opening when vehicle is shut down.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Where is the alternator located on a 2000 Hyundai Sonata?

The 2000 Hyundai alternator is located on the left-hand side of the engine, near the front. You can trace the positive battery cable from the battery to the alternator.


How do you replace the alternator in a 2005 Hyundai Sonata 6 cylinder?

To replace the alternator in a 2005 Hyundai Sonata with a 6-cylinder engine, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner pulley and then disconnect the electrical connections from the alternator. Unbolt the alternator from its mounting bracket, then install the new alternator by reversing the process: secure it with bolts, reconnect the electrical connections, and reattach the serpentine belt. Finally, reconnect the battery cable and check the system to ensure everything is functioning correctly.


What does it mean when the battery light in my Hyundai Sonata goes on?

Usually it means your alternator is bad or going bad.


Hyundai brake and battery warning lights are on?

I had the same problem on my '99 Hyundai Sonata GLS. It was the alternator. It costs about $170 and it's about $150 to take it to Car-X and have them install it.


How do you replace the alternator on a 2000 Hyundai Elantra?

# Disconnect negative battery cable # Raise car and support it # Disconnect the wire harness from the alternator electrical connections # Loosen the alternator lower mounting bolts.Working from above loosen the upper adjustment lockbolt,back off the adjustment bolt swivel the alternator toward the engine and then release the drivebelt from the alternator pulley # Unscrew and remove the alternator upper and lower mounting bolts and washers then remove alternator from its mounting bracket


Is there a main fuse in a Hyundai Elantra?

Yes, a main fuse is located in the Hyundai Elantra engine bay fuse box. The main fuse is used for the alternator just in case the alternator experiences a power surge. It protect the rest of the electrical components.


How do you replace the alternator on a 1997 Hyundai Elantra?

1.Disconnect the negative battery cable 2.Raise vehicle and support it 3.Disconnect them wire harness from the alternator electrical connections 4.Loosen the alternator lower mounting bolt.Working from above,loosen the upper adjustment lockbolt,back off the adjustment bolt,swivel the alternator toward the engine and then release the drivebelt from the alternator pulley 5.Unscrew and remove the alternator upper and lower mounting bolts and washers,then remove alternator from its mounting bracket.


Where is the alternator located in a Hyundai Excel Sprint 1999 model?

where is the alternator located in a Hyundai excel 94 model


What could cause a 97 Hyundai Elantra to die after turning the headlights on and it not being the alternator?

Bad/shorted battery? (doesn't not hold a charge)


How do you replace the alternator on the Hyundai 2.7 liter engine?

The alternator on a Hyundai 2.7 liter engine requires removal of the plastic covers on the passenger side and the vehicle to be lifted. After securing the car remove the plastic cover in the wheel well. Disconnect the battery. Locate the alternator and remove the bolts holding it to the engine as well as all the wire connections.


What will cause the battery to keep running down in a 2002 hyundai sonata?

Dead cell in battery, some light is on and is drawing power when the car is not running, or a relay is stuck. This is assuming the alternator is good.


How do you replace the alternator on a 1992 Hyundai Elantra?

1. Disconnect negative battery cable 2. Raise the car and support it securely on jack stands 3. Disconnect the wire harness from the alternator electrical connections 4. Loosen the alternator lower mounting bolt. Working from above loosen the upper adjustment lock out back off the adjustment bolt swivel the alternator toward the engine and release the drive let from the alternator pulley 5. Unscrew and remove the alternator upper and lower mounting bolts and washers then remove the alternator from mounting bracket