0
What else can I help you with?
What is with my 2002 Dodge Caravan front end noise Clunking noise front wheels on bumps?
check your stabilizer links as well as your sway bar bushings. the sway bar bushings might look ok but what happens is the hole gets egg shapped causes clunkinking noise s going over bumps. just had the same problem in my shop. 2002 dodge caravan.
What causes the car to make clunking noise while driving or going over small bumps?
Worn out front shocks and struts will make a clunking noise when you go over small box. The strut may actually allows the tire to hit the fender well.
What would cause a Clunking noise and vibration noise when turning and going over bumps?
loose or bad u joints.
Why do you hear a clunking noise when going over bumps?
Hi I'm Patrick and I have a 1994 Plymouth Acclaim and that annoying clunking sound is coming from the rear wheels there's a bar that runs down the middle of the rail that holds the wheels together and when you go over a bump that bar smacks the canal it sits in and makes that sound so I just got my welder out and welded it to the canal to keep it from smacking.
If your 1998 GMC Sierra makes a clunking noise at the front end when going over bumps what is wrong?
It's either something loose or something worn out. I'd start with the shocks then look at the ball joints.
What is the clunking noise from a 2001 Ford Taurus left front strut area that happens when the wheels are turned to the right going over bumps as in entering and exiting parking lots?
The cause of the clunking is probably the sway bar link. They are made of white platic and eventually wear out. Both sides were shot on my 2001 Taurus at 75,000 miles. It is a job you can do your self if you are handy with tools. The parts are About $28.00 per side at your local auto parts store and about $38.00 each at the Ford Dealer.
The signs of a Bad steering gearbox?
Clunking/knocking sound felt though steering wheel and floor when turning and going over bumps at low speeds.
What is a half-shaft on a 1999 Ford Taurus?
They are what connects the transmission to the front wheels. There is one per side. They have a Constant Velocity (or CV) joint on each end to allow the suspension to move up and down with bumps and to allow the wheels to turn when you turn the steering wheel. Signs the CV joints are going bad are a clicking or clunking noise when the car is moving and a clunk on accelration. The joints are and integral part of the half shaft and so it would need ot be replaced as a unit.
Honda CR-V front end clunking noise?
It COULD be a constant velocity joint (CV joint) going bad.
How do you know if your strut mounts are bad?
I have a 1990 Chevy Lumina and when you hear clunking sounds when going over bumps or dips or if you have ever replaced your strut assembly you should replace the mounts. You can buy a quickstrut online for a lumina. Front is around $180 and rear is around $80. Hope that helps!
When going over bumps car makes noise in front end?
Both ends
What are the symptoms of a bad ball joint?
Front tire wear, vehicle wants to wander going down the road, may hear clunking and snapping noises up front,
