moble 1 50 weight syn
what kind of oil for a sears push mower and how much?
Hi, your Eaton model 6 hydrostatic transmission requires straight 30 weight oil according to the manual.
# 00 Shell Alvania semi fluid grease
I had the same problem When I bought my mower I put premium hydraulic oil in it. It would move until it warmed up. then would slip. I thought I was going to have to buy a new drive. I finally got in touch with an engineer at Eaton Hydrostatic, the place that makes the hydro units, and he asked me what oil I was using. I told him premium hydraulic oil. He said "No wonder. You need to use 30 weight motor oil." I haven't had any trouble since. My mower is a 4211 Hydro, with an Eaton Model 6 Hydro unit that is attached to a peerless drive unit. So if your unit is an Eaton Model 6 or 7, use 30 weight motor oil in it.
i found that the t190 uses hydrostatic hyd oil further research found that transmission fluids are hydrostatic which means you can use either a tractor trans oil or even a torque oil 50 also high temp hyd 100 is also used
What kind of lawn mower are you changing blades on?
it depends what kind..........
It can depend on the make and model of the transaxle. But, typically they use a 20W50 motol oil in the transaxle.
Any kind you want.
If you raise the hood of the mower up it should have it on the yellow detailed sticker of mower. Normally 10w30
Any 2-stroke mower type will serve.
20-50 motor oil