H
To release the bonnet catch on a Mercedes C180 with a broken grill tongue, you can access the catch mechanism from underneath the vehicle. Use a flathead screwdriver or a similar tool to carefully push the catch lever towards the driver's side, which should release the bonnet. If this doesn't work, you may need to remove the front grille or access the catch from the engine bay. Always ensure safety first and consider consulting a professional if you're unsure.
remove the trim from the interior of the lift gate. There is access to the connecting rods that will release the catch from the Nader bolts.
to the right of the accelarator pedal, small black lever. or do you mean the bonnet catch ? about 12cm to the right of the centre of the bonnet.
If the bonnet catch is broken on a Fiat Punto, you can try to access the bonnet by using a flat screwdriver or a similar tool to manipulate the catch mechanism. Gently insert the screwdriver into the gap between the bonnet and the grille, and try to push or pull the latch mechanism. Alternatively, you can remove the grille or access the catch from underneath the car if necessary. If these methods don't work, consider seeking professional assistance to avoid damaging the vehicle.
There should be a battery release catch under the machine at the edge of the battery access plate
Pull on the hood release handle under the dash driver side. Then go to the front of the car, lift the hood slightly to access the secondary hood catch. Release it and open the hood.Pull on the hood release handle under the dash driver side. Then go to the front of the car, lift the hood slightly to access the secondary hood catch. Release it and open the hood.
To open a broken Corsa bonnet catch, first, try to access the catch mechanism through the grille or underneath the car. You can use a flathead screwdriver to manipulate the latch if it's accessible. If that doesn't work, you may need to remove the grille or use a wire coat hanger to reach and pull the catch. If all else fails, consider seeking professional assistance to avoid further damage.
To manually release the bonnet catch of a VW Polo, first, locate the release lever inside the car, usually found near the driver's side footwell. Pull the lever to release the initial catch. If the bonnet doesn't pop open, you can access the catch from the front grille by reaching through the gap or using a thin tool to push the latch upwards. Once the latch is disengaged, you can lift the bonnet.
make a hook out of a coat hanger. release bonnet from inside the car push hook through the slot the catch normally sits through lift bonnet and pull hook forward to release the safety catch hey presto your in lol
If the bonnet catch lever is broken, you can try to access the bonnet by using a flathead screwdriver or a similar tool to manually release the latch. Locate the latch mechanism through the grille or under the car's front end, and carefully pry it open. If this doesn’t work, you may need to remove the grille or consult a professional mechanic for assistance. Always ensure the vehicle is secure and turned off before attempting any repairs.
If you want to get the bonnet open when the catch has broken and the is no cable to get hold of the Renault Grand Espace; use the screwdriver to PUSH the catch from right to left.
In the new model, (2011) it's a push catch on the cover. It's locked centrally too. I spent 5 minutes working out how to put fuel in my hire car.