You mean flush the heater core. Disconnect the inlet and outlet hose going to the hearer core. Use a garden hose to flush it in both directions. Use extreme care not to apply too much water pressure or you can cause the heater core to leak. No more than 10 lbs of pressure.
The heater core is inside the HVAC housing, under the dash.
It is in the HVAC housing, under the dash.
heater core sits below the front dash in the center there should be a panel below the front dash where the center counsel connects on the passenger side take that off and you should see the pipe going to the heater core
No. You have to remove the dash.
Begin by removing the water supply hoses to your heater core. Remove the heater core retaining bolts. The heater core will come out. Reverse the process to install the new heater core.
the heater core, heater core hoses or heater control valve is leaking
The heater coil and a heater core is the same thing. Hot water circulates from the engine and through the heater core then back to engine generating heat for your heater system.
Remove the water supply hoses from your 1985 Chevy heater core. Remove the heater core retaining bolts. The heater core will come out. Reverse the process to install your new heater core.
You can access the heater core from the passenger side kick plate in your 1964 Chevrolet Corvette. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.
The heater matrix, in a Peugeot 206, can be replaced by removing the heater core and the hoses. With the heater core removed you can replace it with a new heater core.
No, a clogged heater core will not make it overheat. A leaking heater core will.
Instualation of a heater core on a 1999 Ford Explorer V6, how do you install the heater core.