Best Answer

look at the head with the valve cover off find where the exhaust manifold goes in tha is the exhaust valve or looking at the valves the first one is exhaust then intake then intake ,exhaust,exhaust,intake,intake,exhaust if you have the head off i think the intake valves are bigger than the exhaust

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Which valve is exhaust and which valve is intake on 94 GM 350ci?
Write your answer...
Still have questions?
magnify glass
Related questions

Valve settings for a 94 Honda accord?

if you mean valve clearance its .26mm intake side and .30mm exhaust side

What is the valve clearance for a 94 Yamaha timberwolf 250?

intake 0.05mm-0.09mm (0.002"-0.004") exhaust 0.11mm-0.15mm (0.004"-0.006")

Where is the ERG valve on a 94 Geo Metro?

do you mean the EGR valve? it's at the base of the intake manifold

How can you tell which cam is intake or exhaust in a 94 dodge stealth twin turbo?

Real simple exhaust camshafts are the camshafts nearest the exhaust manifolds ( outside if cylinder heads) intake camshafts are on the inside closer to center of engine.

Where is the egr valve in a 1989 Mazda b2200 truck?

EGR valve is allways connected to the exhaust pipe. It goes to the intake. It allows exhaust to flow into intake to reduce N.O. It has a vaccuum hose connected to it. The hose may be connected to a solenoid. On 94 and up check for ohms, if open replace. If this solenoid is bad you will fail smog every time. EGR valve is bolted to the manifold on passenger side, just underneath the carburetor. There are three hex head screws, requires 10mm socket.

Where is the egr valve on a 94 Cadillac deville 4.9?

top of intake behind fuel rail

Map sensor on a 94 Chevrolet truck?

It is on the back left side of the intake, just above the valve cover.

What is the hp and torque for a 12 valve cummins with an aftermarket intake and exhaust?

A 1989-1993 Cummins has 160 HP stock, The 94 and 95 automatic also had 160 HP, The manual in 94 and 95 had 175 HP, a 95 High output was 180 HP. In 96-98 the auto was 175 HP and the manual was 215 HP. 1998 was the last year of the 12 Valve Cummins. An intake and a 4" exaust should add 20-30 HP and a 2-3 MPG increase on your truck.

Where can you locate the PCV valve on a 94 integra?

its located on the intake manifold close to where it connects to head There's another PCV located under that.

Where is the pcv valve on a 95 Geo Metro?

The pcv valve on my 94 1.0L is located on the intake manifold, top, center, close to the block. for later models however it is in a hose between the valve cover and the intake manifold; in an 11 o'clock direction from the oil filler cap and in front of the air filter housing

Where is the egr valve located in a 94 Chevy Camaro 5.7?

The EGR is located on the back of the intake manifold, check out they'll have most of your answers.

Where is the vacuum modulator valve on a 94 Ranger 4x4?

it is located on transmission right hand side just above trans pan and covered by heat shield for exhaust.