answersLogoWhite

0

Get a manual from the parts store or AUTOBOOKSONLINE.COM.

User Avatar

Wiki User

21y ago

What else can I help you with?

Related Questions

How do you change the wheel bearings on a 2005 Chevy 4 wheel drive pickup?

If you are referring to the front bearings, you have to buy a complete hub assembly.


How do you change the wheel bearings on a 1993 1500 Chevy Suburban 2 wheel drive?

u first shabbily ding dong yes that is u change it


How do you repack front wheel bearings 94 Chevy pick up trk?

If the truck is a 4 wheel drive, you can't repack the front wheel bearings. It has a sealed hub/bearing assembly that is not serviceable.


How would i grease the you joints and gimbel bearing in my volva penta 280 drive unit?

You do not have what is called a gimble bearing on a Volvo 280 drive, they are called gimble bearings on 290 and latter drives. The difference being that gimble bearings both bearings can be removed from the drive side after the upper drive assembly is removed. On a 280 you unfortunatly have what is called intermediate bearings where the aft one comes out the drive side, and the other comes out the engine side. If you have bad bearings, the engine has to be pulled to remove the engine side bearing. To grease the u joints (gimble) you would need to remove the upper drive assembly off the outdrive. unclamp the bellow and remove the upper drive along with the U joints. You can then grease the U joints. There is a zerk fitting on the bell housing that allows you to grease the intermediate bearings, but I was told not to do this as it could blow out the seals and cause more problems than it solves.


How do I remove the U-Joint from the drive shaft after snap rings are removed?

You have to pull the bearing assembly out. Be careful and do not let the cap covering the bearings come off.


How do you replace rear wheel bearings on 1997 Grand Caravan?

To replace the rear wheel bearings on a 1997 Grand Caravan, first, safely lift and secure the vehicle, then remove the rear wheel and brake assembly. Next, detach the hub assembly by removing the bolts that secure it to the knuckle, and use a bearing puller to extract the old bearings. Install the new bearings into the hub, reassemble the hub to the knuckle, and reattach the brake assembly and wheel. Finally, lower the vehicle and ensure everything is securely fastened before taking it for a test drive.


Is the 2007 Chevrolet Suburban front wheel drive rear wheel drive or four wheel drive?

The 2007 Chevrolet Suburban has rear wheel drive.


Is the 2010 Chevrolet Suburban front wheel drive rear wheel drive or four wheel drive?

The 2010 Chevrolet Suburban has rear wheel drive.


Is the 2014 Chevrolet Suburban front wheel drive rear wheel drive or four wheel drive?

The 2014 Chevrolet Suburban has rear wheel drive.


Is the 2008 Chevrolet Suburban front wheel drive rear wheel drive or four wheel drive?

The 2008 Chevrolet Suburban has rear wheel drive.


Is the 2001 Chevrolet Suburban front wheel drive rear wheel drive or four wheel drive?

The 2001 Chevrolet Suburban has rear wheel drive.


Is the 2004 Chevrolet Suburban front wheel drive rear wheel drive or four wheel drive?

The 2004 Chevrolet Suburban has rear wheel drive.