0
The liquid coolant absorbs heat from the refrigerator to raise its own temperature to boiling point, it is then cooled down to a liquid again by the surrounding air and piped around so that the process can begin again.
Wiki User
∙ 14y ago
Wiki User
∙ 12y agoNot really, when the water droplets from the ocean rise up to the sky they gather together and form a cloud and when the cloud is very full it will release what we call, Rain. But there is some sort of heat in the sky... when the cloud air and hot air clash together it will cause snow.
Wiki User
∙ 11y agoyes latent heat
Wiki User
∙ 12y agoA "refrigerant".
Wiki User
∙ 14y agoCompressor
Add your answer:
Earn +20 pts
Capacity ratio of a heat exchanger?
It is the ratio of (mdot*Cp)min/(mdot*Cp)max where the heat exchanger contains two fluids for which the mdot*Cp should be calculated for each to determine which one is greater. by doing so one can define the ability of one fluid to carry thermal/heat energy with respect to the other. so this is a way of saying how well can heat be transferred and so how effective is the heat exchanger
Is it true that inside a nuclear power plant nuclear fission takes place within the heat exchanger?
yes
What are the various factors which influence the evaporation of a liquid?
Temperature,Wind,Exposed surface area,Humidity
What happens to the pressure and heat in the evaporator?
It escapes by heating the air round the radiator element.
What component transfers the heat from the products of combustion to the room air?
this is called a heat exchanger with an open campfire it may not be a physical object with an electric heater it may be miles away at a power plant
Heat exchanger for ammonia absorption refrigeration system?
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
What is an evaporation coil with TXV?
The evaporator changes refrigerant from a low pressure liquid to a low pressure vapor, and acts as a heat exchanger, removing heat and humidity from the passenger compartment.
Exchanger is not transfer heat why?
Heat exchanger manufacturers is an ISO 9001 certified company located in Coimbatore, Tamilnadu. The company started its functioning 2011 in, with a strong background in heat exchanger manufacturing. Our well-experienced and dedicated employees consistently thrive to serve our customers with the best heat exchanger solution. visit :: heatexchangersmanufacturers.in
What is heat exchanger duty?
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
Difference between heat exchanger and condenser?
actually there is no difference , infact condenser itself is a heat exchanger
What type of exchanger is used to condense a vapor by cooling it?
A heat exchanger.
What is the difference between a calorifer and a heat exchanger?
Calorifer is a heat exchanger, with a specific of air (or other gas) preheat. Usually is directly in a Duct installed. Heat Exchanger usually is separate unit.
Why Expansion bellows are required in heat exchanger?
expension belows are used for heat exchanger to avoid thermal stress
What is difference between condenser and heat exchanger?
A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.
Why does the heat flow into the evaporator?
The evaporator is cold.. heat flows to a colder object.
What is the abbreviation for heat exchanger?
hx
Where is the dollar plate on a heat exchanger?
It's the flat, flanged cover on the front (and sometimes the rear) of a shell & tube heat exchanger.
