answersLogoWhite

0

There are two main reasons...

1. If the toilets are mounted back-to-back on opposite sides of a wall, some of the movement can be attributed to mechanical transmission of vibration from one to the other due to a structural connection.

2. Suction in the drain. Toilet drains have vents that allow air to move in and gas to move out. If the vents are improperly installed or get clogged they can create a suction in the drain pipe that jiggles the water in other toilet bowls.

3. The theory that this movement is caused by Toilet Gnomes becoming jealous of the attention that other Toilet Gnomes are getting and then scrambling around in a panic is false.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Chemistry

What would cause the water in my toilet to be brown when you flush it?

Brown water in your toilet when flushed could indicate issues with your plumbing, such as rust in the pipes or sediment buildup in the water supply. It could also be a sign of an issue with your water heater or a problem with your water main. It's best to have a plumber investigate to determine the exact cause and address the problem promptly.


Why does the toilet bowl fill but the tank does not?

This could happen if there is a problem with the refill valve in the tank or a blockage in the water supply line. When the toilet is flushed, water flows from the tank to the bowl and then refills from the tank. If the tank is not refilling, it can cause the bowl to fill up but not the tank. You may need to check and replace the refill valve or clear any blockages in the water supply line to fix the issue.


How does toilet water end up in a river?

Toilet water can end up in a river through the municipal sewage system. Wastewater from toilets is transported through pipes to treatment plants where it is treated before being discharged into rivers or other bodies of water. Improperly functioning sewage systems or illegal dumping can also lead to toilet water entering rivers.


What holds toilet water starting with Ci?

The component that holds toilet water starting with "Ci" is called the cistern. It is a tank located at the back of the toilet bowl that collects and stores water for flushing.


what is the name for a lavatory water container?

The name for a lavatory water container is a toilet tank. It is a reservoir that holds the water needed for flushing the toilet.

Related Questions

What is flushed down the toilet?

Water and waste


Why is my toilet leaking from the bottom when flushed?

Your toilet may be leaking from the bottom when flushed due to a damaged wax ring seal or a cracked toilet base. This can cause water to seep out when the toilet is flushed. It is important to address this issue promptly to prevent further damage and water wastage.


Why does the toilet sometimes stink?

It can stink if it is not flushed or it is dirty. In some cases, there could be a leak at the base, and the standing water around the toilet has an odor.


Why is my toilet leaking from the bottom of the tank when flushed?

Your toilet may be leaking from the bottom of the tank when flushed due to a faulty seal or gasket. This can cause water to escape and pool around the base of the toilet. It is important to address this issue promptly to prevent further damage and water wastage.


How much water is wasted when one toilet is flushed in the UK?

Depends on if it needed to be flushed or not.


Is Toilet water clean?

yes,toilet water is clean it is actually the same water you drink........if its flushed No, it have AIDS in it.


Why is my toilet leaking only when flushed?

Your toilet may be leaking only when flushed due to a faulty seal or gasket in the flushing mechanism. This can cause water to escape when the toilet is flushed, leading to a leak. It is important to address this issue promptly to prevent water damage and higher water bills.


Why does the toilet only leak when flushed?

The toilet only leaks when flushed because there may be a problem with the flushing mechanism or the seal between the tank and the bowl. When the toilet is flushed, water is released from the tank into the bowl, and if there is a leak in the mechanism or seal, water can escape and cause a leak.


Where does the toilet water go after it is flushed?

After a toilet is flushed, the water and waste go through pipes in the plumbing system to a sewage treatment plant or septic system for processing and disposal.


Can toilet bowl water back up in tank when flushed?

NO.


If the seal is broken on toilet can this cause water to back up into tub when toilet is flushed?

NO way


Why does water run in the toilet bowl?

Water runs in the toilet bowl to maintain proper water levels and to flush waste down the drain when the toilet is flushed.