This would all depend on your actual motherboard. Some boards do take a Pentium 3 chip. If you know the model of your board, then check the manufacturers website, for details of the maximum mhz allowed for it.
If you don't know the model number, then go to Google, and download a program called belarc advisor. Once installed, this will give you the in's and out#s of your PC. All hardware, and software installed.
If you find the board does take a Pentium 3 CPU, then you will need to purchase a 'slotty'. Basically this is a piece of hardware, that turns the black CPU, into a normal CPU. It slots inside the same place as the original CPU. With the added advantage of a heatsink and fan, which can be plugged onto the board.
Hope this helps
be safe
Pentium D was 1st Intel desktop CPU to put 2 CPU's in same package called dual core. It uses a 775 pin motherboard socket, now a standard for many Intel processors
Pentium D was 1st Intel desktop CPU to put 2 CPU's in same package called dual core. It uses a 775 pin motherboard socket, now a standard for many Intel processors.
This depends on what type of A-Series you are talking about, but the i3 is better than the Pentium Dual Core although they are based on the same microarchitecture.
No, the Pentium 3 and Pentium 4 are not only samples of 2 completely different architectures, but also use a different socket so a change between the 2 on the same motherboard is impossible.
No. The Intel Pentium 4 line was produced for three sockets. The shortlived Socket 423, Socket 478, and LGA 775 (sometimes called Socket T).
No. The newer processor will not use the same motherboard.
Not necessarily. There have been three different sockets used for Pentium 4 processors (Socket 423, Socket 478, and LGA775). They are not interchangeable without special adapters. Even when pin-compatible, motherboard updates may be necessary for the processors to actually work.
The difference is that Core Duo processors have to "engines" instead of one. With other words, Core Duo means 2 Intel processors in the same time working!
I've yet to encounter an AT motherboard that supported a Pentium III processor. All the same, it is possible to run Solaris 10 on a Pentium III computer. You'll need at least 256 MB of RAM, however.
No. Pentium 3 and Pentium 4 stand too apart from each other. For upgrading any processor on the same motherboard, they need to be in same socket type and the external interfaces should be compatible. P3 is a very old single core chip and is a lot different from latest dual core processors, so this upgrade is not possible.
You cannot convert an existing motherboard to DDR2. As The Intel Pentium D was actually designed for motherboards with DDR2 RAM (you must have gone out of your way to purchase one with DDR RAM), it should be no problem to move the processor to another board.
I have an intel motherboard with a pentium 5 cpu 2.66 ghz bios version cr94510j.86a. I am in the same town as the intel plant, and may be a one off item. intel desktop board #d945gccr