0
The program counter in the processor holds the address of the next instruction needed from main memory. The program counter copies its contents into the memory address register. The memory address register then sends the address along the address bus to main memory and the contents of the memory location specified by the address are sent along the data bus to the memory buffer register. The contents of the memory buffer register are then copied to the current instruction register where they are decoded and executed.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What are the functions of the CU?
The function of the Control Unit is to Fetch, Decode, Execute and to Store information.
What are the four task that a CPU performs to process information that has been input by a user?
1)Fetch 2)Decode 3)Execute 4)Store
What is memory cycle in CPU?
fetch decode exec store
What are the steps to properly and completely execute an instruction?
1 Fetch Instruction from Memory 2 Decode Instruction and Fetch Operands 3 Perform ALU Operations 4 Memory Access (for load/store)5 Store ALU result to register file 6Update PC
What are the four steps of the machine cycle and describe what occurs at each step?
fetch decode execute and store in that order.... i do not know the description of each stage i need the answer to that myselfmachine cycle is also called instruction cycleCPU performs following steps to execute an instructionFetchDecodeExecuteStoringFetchload instruction from the memory to execute.this operation performed by control unit.Decodedetermine what the instruction is telling the computer to do,and what operation should be taken.Executeafter decoding and getting the required result,CPU finally execute instruction by ALU(arthematic logic unit).Storingthe process of writing the result to memory is called storing or the process of storing the generated result to the main memory.
What are the steps a CPU performs?
Three steps is probably minimal, and not really sufficient to describe the processing a CPU performs. If you have to use 3, probably fetch (the instruction), execute (the instruction) and store (write the results). However, this skips fetching the operands (if any). Most instructions require one or more operands. If you assume the instruction is already fetched, you might classify the three steps as fetch the operand(s) (read them from memory), execute the instruction (perform an operation on the operands) and store (write the results to memory). I think you will find it is more fetch, decode and execute are the three steps a CPU performs
What are The CPU performs four steps in executing an instruction?
Three steps is probably minimal, and not really sufficient to describe the processing a CPU performs. If you have to use 3, probably fetch (the instruction), execute (the instruction) and store (write the results). However, this skips fetching the operands (if any). Most instructions require one or more operands. If you assume the instruction is already fetched, you might classify the three steps as fetch the operand(s) (read them from memory), execute the instruction (perform an operation on the operands) and store (write the results to memory). I think you will find it is more fetch, decode and execute are the three steps a CPU performs
What is 6 stage instruction pipelining?
1. FI (fetch instruction) - get the next instruction 2. DI (decode instruction) - decode the opcode and operands 3. CO (calculate operands) - calculate EA of the operands 4. FO (fetch operands) - fetch operands from memory (not necessary for register data) 5. EI (execute instruction) - execute instruction storing result if necessary 6. WO (write operand) - write the result in MEM
What are the Machine Cycles For Inr M Instruction?
3 for opcode fetch, 1 for opcode decode, 3 for operand fetch, and 3 for opcode store, for a total of 10, not including wait states.
Which is the long instruction in 8085 instruction?
The CALL instruction uses 18 clock cycles. 3x3 fetch, 2x3 store, 1x1 decode, 2x1 decrement.
What are the 4 steps that describes how a computer works?
I'm not completely sure what you mean as there are many possibilities. One possibility is: Fetch, Load, Execute, Store.
What Timing diagram Intel 8085 out instruction?
The OUT instruction on the 8085 uses 10 T cycles, 3 for opcode fetch, 1 for opcode decode, 3 for port address fetch, and 3 for port data store. Any wait states encountered are above and beyond that.
