To burn the same amount of energy contained in one liter of oil, which is approximately 8,000 calories, you would need to consider your running speed and body weight. A person running at a moderate pace (about 6 mph) typically burns around 600-800 calories per hour. Therefore, it would take roughly 10 to 13 hours of running, translating to several days depending on how long you run each day. For example, if you run for an hour daily, it would take about 10 to 13 days to burn that equivalent energy.
1244.3 days
centilitre
7.4 Liter about 6 1/2 or 7qts
The amount of energy in one section of the pyramid would always be less than the amount of energy in the section below it.
If water absorbs a large amount of energy it boils.
A biomass pyramid looks like an energy pyramid, in that the largest biomass is contained in the producer level, and the least biomass is contained in the level of the highest order consumer. Basically, as you move up the energy pyramid, there is less energy available to support the biomass at each subsequent level.
5 pounds is a little over 2 kg.; density of gold is about 19 kg/liter, so that would roughly be a volume of 1/10 liter; that amount of gold would easily fit in half a cup if it has the appropriate shape.5 pounds is a little over 2 kg.; density of gold is about 19 kg/liter, so that would roughly be a volume of 1/10 liter; that amount of gold would easily fit in half a cup if it has the appropriate shape.5 pounds is a little over 2 kg.; density of gold is about 19 kg/liter, so that would roughly be a volume of 1/10 liter; that amount of gold would easily fit in half a cup if it has the appropriate shape.5 pounds is a little over 2 kg.; density of gold is about 19 kg/liter, so that would roughly be a volume of 1/10 liter; that amount of gold would easily fit in half a cup if it has the appropriate shape.
the best one would be energy star
Potential energy is the energy contained in the position of an object, so object hanging on a tree would be potential energy.
That would be the density of the material in that volume. Density is a measure of how much mass is contained in a given volume. It is typically expressed in units like grams per cubic centimeter or kilograms per liter.
amount of energy required to heat 1 liter of water completely depends on the desired change in temperature. q = Cg m ∆T ∆T = q/ (Cg x m) = 4180/(4.18 x 1000) = 1 4180 J would heat 1 liter of water by 1 oC
Depending what you relate it to. In an electronic system it would relate to the amount of watts consumed or supplied; whereas, an organic system would be the magnitude of glucose (or equivalent).