0
What else can I help you with?
What is the Amplitude of a signal measure?
The amplitude of a signal is the measure of the maximum magnitude of the signal from its equilibrium value. It represents the strength or intensity of the signal. A higher amplitude indicates a stronger signal, while a lower amplitude indicates a weaker signal.
What does the flashing signal in the picture indicate?
The flashing signal in the picture indicates a warning or alert.
What does the greywire power good mean and how is it used by the motherboard?
Grey wire is used to report to the motherboard that the PSU has passed all tests and ready to work. Some motherboards have hard times recognizing good signal, as result the motherboard will not start.
What signal does a high price send to buyers and sellers?
a signal that makes coustermers buy more supplies from te companies
Pacco ix computer it says no cable insert?
This generally means that the monitor section of the unit is not receiving a video signal - make sure the jumper between the two video plugs in place. On mine unfortunately it was a dead motherboard for the computer. The monitor section was working fine - just no signal from the motherboard.
What is the proper way to signal a right turn while riding a bike?
To signal a right turn while riding a bike, extend your right arm straight out to the side. This indicates to others that you intend to turn right. Remember to always check for traffic before making any turns.
Which signal word indicates the material is moderately toxic?
The signal word "WARNING" is used to indicate that a material is moderately toxic.
A line of a motherboard bus that a hardware device or expansion slot can use to signal a CPU that the device needs attention is called?
IRQ
What BIOS is used to change settings on the motherboard?
Anything that can read the BIOS chip. It can be a computer or microprogramming software and hardware.
What is the time limited road signal?
A yellow flashing light indicates caution.
Which sound signal indicates that you disagree and prefer to pass it on your port side?
The sound signal that indicates you disagree and prefer to pass on your port side is one short blast of the horn. This signal is typically used in maritime navigation to communicate intentions to other vessels. If you hear this signal, it means the signaling vessel intends to pass you on your left side.
What is the proper procedure to signal on city street?
200
