0
What else can I help you with?
Does copper wire snap when it is over a flame?
Copper wire does not snap when exposed to flame; it will start to melt instead. Copper has a high melting point of around 1,984°F (1,085°C), so it takes a very high temperature to cause it to melt or burn.
What happens to copper wire when heated?
When copper wire is heated, it expands due to thermal expansion. As it gets hotter, the electrons in the copper atoms move more freely, increasing electrical resistance. Excessive heating can cause the copper wire to melt and ultimately vaporize.
What happens to the matter in copper wire when heated?
When copper wire is heated, the atoms within the wire vibrate more vigorously, leading to an increase in kinetic energy. This causes the wire to expand slightly in length and thickness. If heated excessively, the wire can eventually melt and transform into a liquid state.
How do you get copper out of wire?
Generally speaking, the copper is the wire. If it is coated, it can be stripped in small sections, but if you need to get rid of a large amount of plastic insulation, you will have to find some safe way to burn it off. Safe, in this context, means in a place where the fumes ( which are toxic ) won't bother anyone, and the metal can be removed without danger- preferably after it has cooled.
Which wire would make the bulb dimmer copper or plastic or gold?
Copper would be the best conductor for the wire to make the bulb brighter, as it allows electricity to flow more easily. Plastic is an insulator and would not conduct electricity, while gold is a good conductor like copper but is less commonly used due to its higher cost.
Which one will undergo plastic deformation copper or steel wire?
Copper wire will undergo plastic deformation even though it does not break like steel wire.
Why is the copper wire surrounded by plastic?
because plastic is an insulator
Can you boil the plastic off copper wire?
It is not recommended to boil the plastic off copper wire as this can release harmful fumes into the air. It is safer to use a wire stripper or cutter designed for this purpose to remove the plastic insulation from copper wire.
Would plastic melt if touched to a live wire?
No, Plastic is not conductive! I other words plastic can not conduct electricity therefore it can not produce resistance, and resistance is what you need to produce heat. and that heat would melt the plastic. Now if you touch a "live" wire to metal and that metal was grounded ( for example to a cold water pipe) then you would be completing the circuit, then that piece of metal would heat up very rapidly and eventually melt! of-course the smart person would not do this but if you where not so smart be prepared to get burned!!!! BE SMART!!
What purpose does the plastic cover and the copper in a wire serve?
The copper is a good conductor of electricity. While the insulating plastic covering of the wire prevents bare wires touching and creating a short, or shocking (electrocuting) a person should the bare wire be touched with bare hands.
Does copper wire snap when it is over a flame?
Copper wire does not snap when exposed to flame; it will start to melt instead. Copper has a high melting point of around 1,984°F (1,085°C), so it takes a very high temperature to cause it to melt or burn.
How can i melt plastic off copper wire?
I am building a house and recently burned a pile of scrap lumber. We found several nicely cleaned copper wires in the ashes and relized we had inadvertently thrown in a couple short lengths of plastic wrapped wiring. It was nicely cleaned and this method might work well for you if you are talking about a small volume of wire. Not very technical, but successful! I think the melting plastic could release harmful vapors so I wouldn't recommend doing this with large volumes of wire without addition research or comments from an expert! Good Luck! I am building a house and recently burned a pile of scrap lumber. We found several nicely cleaned copper wires in the ashes and relized we had inadvertently thrown in a couple short lengths of plastic wrapped wiring. It was nicely cleaned and this method might work well for you if you are talking about a small volume of wire. Not very technical, but successful! I think the melting plastic could release harmful vapors so I wouldn't recommend doing this with large volumes of wire without addition research or comments from an expert! Good Luck!
What happens to copper wire when heated?
When copper wire is heated, it expands due to thermal expansion. As it gets hotter, the electrons in the copper atoms move more freely, increasing electrical resistance. Excessive heating can cause the copper wire to melt and ultimately vaporize.
Is copper wire the same as thugsten wire?
No. Copper wire is made of the element copper. Tungsten wire is made of the element tungsten. Copper wire is made to conduct electricity. Tungsten wire is made for the filament in light bulbs as tungsten does not melt under even very high temperatures.
What happens to the matter in copper wire when heated?
When copper wire is heated, the atoms within the wire vibrate more vigorously, leading to an increase in kinetic energy. This causes the wire to expand slightly in length and thickness. If heated excessively, the wire can eventually melt and transform into a liquid state.
What is a phone made of?
Plastic, copper wire, silicon chips, and various other materials.
How do you get copper out of wire?
Generally speaking, the copper is the wire. If it is coated, it can be stripped in small sections, but if you need to get rid of a large amount of plastic insulation, you will have to find some safe way to burn it off. Safe, in this context, means in a place where the fumes ( which are toxic ) won't bother anyone, and the metal can be removed without danger- preferably after it has cooled.
