0
What else can I help you with?
What is the wrench size to take off the front brake pads of a 2000 Saturn LS?
to remove the front brakes you need a 7mm hex socket and a 10 mm hex socket
Change Oil filter cartridge Saturn vue 2008 2.4L Eng?
To change the oil filter on a 2008 2.4L Vue or Sky you need a special short 32mm (1.25in) socket with a 3/8 in drive. Here is a package that I found on eBay for the filter element and socket. Good luck! http://cgi.ebay.com/ebaymotors/GM-oil-filter-&-socket-wrench-32mm-Saturn-L-LS-LW-Vue-_W0QQitemZ120330902655QQcmdZViewItemQQimsxZ20081109?IMSfp=TL0811091110006r29122
What size socket do you need for a front axle nut on 2003 jeep liberty?
It is a 36 MM socket
What socket size is needed to remove the front hub nut from a Peugeot 306?
You will need a 35 mm socket.
Do you need a special tool to change the hub assemblies on a 95 Saturn SL2?
Is this the front assembly or the rear? I can't say for sure on the rear, but on the front, you will need a very large socket for the nut at the outside of the hub assembly. I don't recall for sure, but I think it's like 30mm. Check before you buy a socket for it, as they are expensive. Also, you may want to have a pickle fork to break the ball joints loose up front. Aside from the large nut at the outside of the hub assembly, the largest wrench you will need is 19mm. If you can find a Chiltons manual for a Saturn SL, it will walk you through the entire process of removal and re-assembly. . Found this link to change a Saturn S-Series front hub. It worked perfectly as all the pictures were extremely helpful. I actually pressed new bearings into to the existing hubs which is not recommended by Saturn but worked out OK for me. http://www.xwarlordx.com/twin_cam/tech.html
What tools are need to change rotor on 2008 Saturn Vue?
To change the rotor on a 2008 Saturn Vue, you will need a few essential tools: a lug wrench to remove the wheel, a socket set (including a ratchet and the appropriate socket size) to detach the brake caliper and rotor, and a torque wrench for reassembly. Additionally, a brake cleaner is useful for cleaning the new rotor, and a bungee cord or rope can help hold the caliper out of the way while you work. Lastly, having a jack and jack stands is necessary to safely lift and support the vehicle.
What size socket do you need for a front axle nut on 94 grand Cherokee?
36mm
What size socket do you need for a 2002 Pontiac Bonneville front axle nut?
30
Do you need special tools to change the front shocks on a 98 expedition?
In order to change the front shocks, you will need a ratchet and socket kit. You will also need some replacement shock absorbers.
What size socket do you need for a front axle nut on a 2000 jeep wrangler 4x4 sport?
36mm
What size socket to remove bolts on the rear wheel hub on a 1992 Saturn?
To remove the bolts on the rear wheel hub of a 1992 Saturn, you typically need a 13mm socket. However, it's always best to double-check with a repair manual or verify the size with a socket set, as variations can occur. Make sure to use a ratchet or breaker bar for better leverage when loosening the bolts.
How do you get the front head light out to replace it?
Might be useful to precise what model you need this for... Saturn relay 2005
