Want this question answered?
Be notified when an answer is posted
Onions don't have volts.
If a light bulb is rated at 60 Watts, the voltage will depend on the specific type of bulb. For a typical incandescent bulb, the voltage would be around 120 volts. However, for an LED or CFL bulb, the voltage could be different, such as 120 volts or 240 volts.
Each light bulb will receive the full 9 volts from the battery in a series circuit, so each bulb will be operating on 9 volts.
15.
A fluorescent light bulb typically operates on a voltage range of 100-277 volts, depending on the specific model and design. The most common standard voltage for residential use in the United States is 120 volts.
Um, a 5 volt light bulb?
amps equals watts divided by volts.
A light bulb connected between to wires, each having 300 volts to ground that are in phase, will not light, because there is no differential voltage available to do any work. If each wire has 300 volts to ground and are out of phase (600 volts between them) the light bulb will be lit, if it is rated at least for 600 volts, otherwise it will burn out.
.63 ampere draw @ 7 volts
A typical big light bulb, like an incandescent bulb, usually requires around 120 volts to operate. However, it's always best to check the specific voltage requirements listed on the bulb itself or its packaging to ensure safe and proper operation.
To calculate the amperage, you can use the formula: Amps = Watts/Volts. For a 65-watt light bulb at 120 volts, the amperage would be 0.54 amps.
If you divide the watts of the bulb by the supply voltage, that is the current. For example a 60 w bulb on a 240 v supply gives a current of 60/240 which is ¼ amp.