0
What else can I help you with?
Why as load increase the condenser temperature will also increase?
Because the more the load the more the temperature.
Why the vacuum is maintained in Steam condenser?
It is important to maintain a vacuum in a condenser if you want it to work well.
When the load on the evaporator increases the TXV?
when the load increases the amount of vapor increases , so the pressure inside the evaporator increases and as we r in the wet region inside the evaporator the pressure and the temp. are proportional so the temp. too will increase but we use some valves to fix this problem , for example thermostatic expansion valve it helps add more m dot of the refrigerant so the amount of heat from the load will be distributed over a larger mass so the pressure inside the evaporator will remain the same
How can you increase a pulleys mechanical advantage?
By increasing the effort distance on the machine.
Does the voltage between two points in a circuit decrease or increase when the electric field in the circuit increase?
When the electric field in a circuit increases, the voltage between two points typically increases as well. This is because voltage is directly related to the electric field and the distance between the points, following the relationship ( V = E \cdot d ), where ( V ) is voltage, ( E ) is the electric field strength, and ( d ) is the distance. Thus, an increase in the electric field generally results in a higher voltage across the same distance.
HOW to increase the superheat?
To increase superheat in a refrigeration or air conditioning system, you can raise the evaporator temperature by lowering the refrigerant flow or increasing the load on the evaporator. Adjusting the expansion valve to reduce the refrigerant flow will allow the refrigerant to absorb more heat before it exits the evaporator. Additionally, ensuring the evaporator is clean and free of ice can help maintain efficient heat absorption, contributing to higher superheat levels. Regular maintenance and monitoring are essential to achieve optimal superheat settings.
Why the vacuum is maintained in condenser?
For increasing steam turbine efficiency. if vacuum is not maintained then, uncondensable gases and air in condenser will increase the condenser pressure.
Why as load increase the condenser temperature will also increase?
Because the more the load the more the temperature.
When an evaporater experiences a heat-load increase the suction pressure does what?
When an evaporator experiences a heat-load increase, the suction pressure will decrease. This is because more refrigerant is being vaporized in the evaporator to absorb the additional heat, leading to a lower pressure in the system.
What is the purpose of HVAC compressor?
compressor is one of the essential component of an Air-Conditioning Loop, its basic functioning is to increase the pressure and temperature of the refrigerant which is then passed through the condenser where heat exchange takes place thus reducing the temperature, keeping the pressure intact. then comes the expansion valve which reduces both the temperature and pressure, thus we achieve a refrigerant at lower temperature and pressure, which is used to cool down the room, the exit from the evaporator is then connected back to compressor inlet via accumulator
Why the freeze time of an ice machine would increase?
The freeze time of an ice machine could increase due to factors such as a decrease in refrigerant levels, a buildup of scale or mineral deposits on the evaporator coil, or a malfunctioning condenser fan. These issues can impact the machine's ability to transfer heat efficiently, resulting in longer freeze times. Regular maintenance and cleaning can help prevent these issues.
Part of the microscope that is used to increase the amount of light passing through the specimen?
The condenser is the part of the microscope that is used to increase the amount of light passing through the specimen. It focuses light onto the specimen to improve image quality and enhance visibility. Adjusting the condenser can help optimize the lighting for different types of samples.
A clogged or dirty evaporator coil can?
-reduce efficiency of your unit,and increase pressure ratio of the compressor,-
The increase in time and cost with distance?
The increase in time And cost with distance is referred to as friction of distance
Do the condenser used to increase the amount of light passing through the specimen?
No, the condenser does not increase the amount of light passing through the specimen. Instead, it focuses and concentrates the light onto the specimen to improve illumination and contrast for better visibility under the microscope.
What is the purpose of the fins on the condenser?
The fins on the condenser increase the surface area available for heat transfer. This helps to efficiently dissipate heat from the refrigerant as it flows through the condenser coils, allowing it to cool down and change state from a gas to a liquid.
How does the duration of training influence aerobic conditioning?
Aerobic conditioning is influenced by two things, intensity and duration. Duration will increase conditioning greatly, enhancing endurance as opposed to strength.
