0
What do you do if the speaker on your computer work but no sound come out of the computer?
if its is not pluged into the Right ouptup jack go to step 1.
Step 1 Plug it into the right jack, play a song make sure the speakers is turned on and also turned up.
Step 2 Now, if it is in the right output jack, triple check to see if it is not muted. then try a song
If it still dosent work shut down PC and/or contact a computer expert.
What else can I help you with?
What is the difference between an amplifier and a speaker?
The subwoofer is the actual speaker making the loud bass. The amplifier is what powers the subwoofer and makes it work how it does. It only uses the low frequencies from the audio source and amplifies it.
Today how many people work with computer?
90% of the people working with computer..
A word for writing computer software?
The work for writing computer software is programming.Programming is a name for writing computer software.
Will 8 ohm speaker work with 4 ohm bass guitar amplifier?
Yes. As long as the speaker impedance is higher than the minimum rating for the amplifier, you are OK.
Do you have to be licensed to work in Texas as a computer software engineer?
not yet
How does a computer speaker work?
Just like any other speaker.
How can a speaker work with holes in it?
It can work, but it will not sound good. Any deformations of the cone will "color" the sound, which will sound muddy and not clear. Eventually the speaker will die due to the voice coil dragging in the magnet because the speaker isn't moving correctly. If you have a speaker with a hole in it you should replace it.
How do you connect numark mixdeck universal and 2 behringer speaker B415DSP and to your computer What also do you need?
1) mixer to speakers: Numark main XLR-output to Behringer speaker XLR-input 2) sound from computer: computer line out to a free input on the Numark 3) sound to computer: use the USB cable connector on the Numark (might also work the other way around, not 100% sure)
What is the purpose of the cone on a speaker?
The cone on the speaker works as a membrane to vibrate and push the air to create sound waves. The pushing action comes from the electromagnetic forces at work when electrical signals come from a sound source when plugged in and into the transducer.
How does the keys in a music keyboard work?
they get pushed and then vibrate sound system which comes out of the speaker
What style of computer speaker should I purchase for voice and phone computer capability?
Any Logitech speaker designed for VOIP will work well for phone conversations, and probably will be just fine for music or general computer use.
Were do you get a sound driver?
Most computers come pre-installed with a sound card. This component allows you to listen to any audio coming from your computer or record audio into your system. Each sound card has its own specific driver to make it work successfully on a computer's operating system. Usually, a sound card will come fully equipped with an installation CD that includes the sound card driver. This driver directs the data connections to and from your sound card and the computer's operating system. And you can download a sound driver from the Interenet.Also,below the related link is not a bad choice for you if you need it.
Do you need an ampifiler for paper jamz guitars to work?
NO look below the sound bar there is the speaker for you
Can I get a set of computer speakers that attach to my screen?
The only way that will work is if your screen has speaker plugs.
Is 22 gauge speaker wire for surround sound work?
It is better to use 16 gauge or 14 gauge speaker wire for your home theater applications.
How does a computer microphone work?
A computer microphone is basically used for calling others while chatting. It works like a telephone or cellphone system, but you also need a speaker or headphone to listen the words spoke by other. You can call a friend in Gtalk.
Can I connect 2 speakers to one speaker cable e.g.1 speaker cable out from receiver split and connected to two speakers.?
No, the speaker has a negative and positive port, they both need to be plugged into for it to work. if they aren't, then the speaker will not create sound
