A conversion from pounds per square feet (psf) to pounds per linear feet plf is necessary to design, for example, a beam.
---Take a 15 foot floor beam for example: live load plus dead load is say, 100 psf. lets say this beam's tributary area is 8 ft (meaning it supports all loads 4ft on either side).
-now the math : 8ft X 15ft = 120 square feet. Now 120 sf X 100 psf = 12,000 pounds. this means the beam carries 12,000# divide by 15 ft and you have 800 pounds per linear ft or 800 plf.
Basically find total Weight then devide by the Length.
-Mike Z
The standard atmosphere (symbol: atm) is a unit of pressure equal to 101,325 Pa or 1,013.25 hectopascals or millibars. Equivalent to 760 mmHg (torr), 29.92 inHg, 14.696 psi. (The pascal is a newton per square meter or in terms of SI base units, kilogram per meter per second-squared.) Simply convert meters to feet using this formula.
1 Square Metres = 10.7639104 Square Feet
There is no conversion from PSI to lb/in. It is a totally different calculation.
Those units measure different things, so you really can't convert one to the other.
pounds per square foot / 144 = PSI
51 psi = 7,344 pounds per square foot
19.25 lb/gal = 1 psi
PSI
mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.
To convert pounds to kilograms you multiply pounds by 0.453.
To convert from pounds to kilograms, multiply pounds x 0.453592.
there are approximately 2.2 pounds per kilogram to convert pounds to kilograms: divide pounds by 2.2
It is impossible to convert the measure of weight (mass) to the measure of length (distance). Forget the not necessary word "linear".
You cannot convert bearing weight or pressure to a linear distance.A gram is equal to 0.0022 pounds. For these purposes, a kilogram (1000 g) is often more usable(1 kg = 2.2 pounds)A square meter is equal to about 1.196 square yards. A square yard is 0.836 square meters.- To convert GRAMS PER SQUARE METER to GRAMS PER SQUARE YARDmultiply by 0.836- To convert GRAMS PER SQUARE METER to POUNDS PER SQUARE YARDmultiply by 0.001843- To convert KILOGRAMS PER SQUARE METER to POUNDS PER SQUARE YARDmultiply by 1.843
The answer will depend on what it is that you wish to convert into PSI. You cannot. Inches are a linear measure, PSI (pounds per square inch) is a measure of pressure. The units are incompatible.
Pounds per square foot x 0.006944 equals psi
mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.
Check related links
Multiply by 144, since there are 144 square inches in a square foot (12x12).
7.5kpa
23,000 pounds per square inch equals 16170000kg per square meter.
Inches of water x 0.03613 equals pounds per square inch (psi).
To convert pounds to kilograms you multiply pounds by 0.453.
You cannot convert gallons per minute to pounds per square inch. The quantities do not have the same meaning. Gallons are a measure of volume, and pounds are a measure of weight. Minutes are a measure of time, and square inches are a measure of area.
It is difficult if not impossible to convert pounds to square feet. The units pounds are used to measure mass and square feet measures area. If you were looking at something like floor tile, which weighs "X" per square foot, it may be possible to calculate and find an answer. As it is, though, we're stuck.