Use the "Tenths" scale of inches, or the centimetres and millimetres scale.
nine inches is 228.6 millimetres.
45
You will not find 0.12 inches mark on the normal rule, but0.125 inches is 1/8th of an inch. Is that close enough?
A metric ruler is 30 cm in length. This type of ruler is commonly called a metric foot ruler because it is similar in length to a one foot ruler.
It is 2/10 past the one inch mark on a ruler.
You will not find 4.78 inches on a ruler. The graduations for inches are numbered and these are usually subdivided into 10. So 4.78 inches will be a tine fraction short of the eighth division after the 4 inch mark.
what are the smallest units on a metric ruler?
Any old Meter ruler should be fine, 36 inches is about 93 centimetres, just subtract the difference.
where can you find a ruler that is 3 feet long?
find a ruler with decimals.
Look at a ruler and you'll find out.
It is 113/93. You can simplify the ratio of required.
% rate = 93/112 * 100% = 83.04%
Walmart
a ruler no LITERLY
A ruler?
Ruler. you measure with a ruler, yard stick, tape measure, or estimate.
The easy way to find the length of a pencil is to use a ruler to measure it. A "small" ruler might not make it, but a "regular" one foot ruler will do the job nicely.
Only one, if your ruler was 93 million miles long. If you are using a standard 12 inch ruler, then about 491 trillion. If you are referring to a Monarch or Sovereign then about 82 trillion.