Look at it this way.
____ 1.0
___ 0.9
___ 0.8
___ 0.7
___ 0.6
____ 0.5
___ 0.4
___ 0.3
___ 0.2
____ 0.1
Where do you think you should draw to? The spot marked 0.1. If its says Units, it's meaning CC's which 1cc = 1ml. But remember 0.1 cc is not 1cc. It is one tenth of 1 ml.
3l - 175ml = -172
A 3cc syringe cannot measure 25ml, as its maximum capacity is only 3cc (or 3ml). To measure 25ml, you would need a larger syringe or a different measuring device, such as a 25ml graduated cylinder or a larger syringe. If you need to use a syringe, you could fill it multiple times (8 times for 24ml and then add 1ml with a smaller syringe) to reach the desired volume.
Measure to the edge of the plunger (or piston) where it touches the inside of the syringe cylinder. http://www.northcumbriahealth.nhs.uk/palliativecare/clinical/syringe/05.php
The weight of 175ml of sugar can vary depending on the type of sugar. On average, 175ml of sugar weighs approximately 140 grams.
175ml
If the volume is zero, then there is no volume left in the syringe to measure.
To measure 0.3ml in a 1.875ml syringe, you would fill the syringe up to the 0.3ml mark. This is typically the third smallest mark on the syringe. Make sure to read the measurements carefully to ensure accurate dosing.
0.34 ml on a syringe represents 34 units on the syringe's scale. To measure it, draw the plunger up until the liquid reaches the 0.34 ml mark on the syringe.
It is much easier to just use a insulin syringe and withdraw to .21/2 or .2 and 5 small lines
I work at a hospital and we usually use ml's or cc's depending on the type of syringe.
That is 0.772 cups
?