Centrifugal force
Yes, when turning left at an intersection, you must yield the right of way to pedestrians crossing from the opposite direction.
Turning something 'clockwise' would be turning it in the direction the hands on a clock turns. 'Counter-clockwise' would be turning it the opposite direction of a clock. I always remember anti-clockwise from clockwise, by which way a clock turns for clockwise, and the opposite way of a clock turning for anti-clockwise.
opposite
To remove bicycle pedals, turn the wrench in the opposite direction of normal pedaling. This means turning the wrench towards the back of the bike on the left pedal, and towards the front of the bike on the right pedal.
To remove pedals from a bike, turn the wrench in the opposite direction of normal pedaling. This means turning the wrench towards the back of the bike on the non-drive side, and towards the front of the bike on the drive side.
To remove bicycle pedals, use a pedal wrench to turn the pedal in the opposite direction of normal pedaling. The left pedal is removed by turning clockwise, while the right pedal is removed by turning counterclockwise. Make sure to apply force in the correct direction to avoid damaging the pedals or the crank arms.
Turning the diaphragm in the opposite direction from the correct positioning may result in incorrect lighting or focus in microscopy. It could cause uneven lighting, shadows, or poor contrast in the images you are trying to capture. It is important to follow the manufacturer's instructions for proper use of the diaphragm to obtain the best results.
Trim it by turning the trim knob in the opposite direction that it is spinning
A three-point turn is a commonly used maneuver to turn your vehicle around in a limited space so you can head in the opposite direction. It involves turning the steering wheel to its full extent in one direction, then in the opposite direction, and then straightening out to complete the turn.
It sounds like the starting capacitor is about to give up.
the appropriate turning lane for their intended direction. They should not cross over into the turning lane for the opposite direction while making their turn. By using the designated turning lane for their direction, drivers can safely and efficiently navigate the intersection.