0
You should use a full face or half mask respirator (not the cheap disposable dust mask). Stick with a known brand name such as MSA, North or 3M. Most of these masks are made in a couple of different compounds; 1. rubber-cheaper masks, isn't as flexible, less comfortable to wear or 2. Silicone-more expensive, fits a lot of faces, very flexible and conforming.
Masks should be fit to ensure that they fit your face properly. If you buy your mask from a retailer such as Home Depot; they WILL NOT be able to conduct a fit test to ensure proper fit. Most people fit a medium mask (80 % of the population) but there are exceptions (smaller people, asians, women etc) that require smaller masks. The user must be clean shaven where the seal of the mask fits with the face (in order to be compliant with NIOSH National Institute for Occupational Safety and Health-which all respiratory protection is certified by). failure to be clean shaven could result in the dust passing by the skirt of the mask and entering your lungs, which over time could cause Silicosis.
The filter that is required for the mask is a P100, which will stop particles down to 0.03 microns in size. The cartridge colour is standard between all major manufacturers and in this case the cartridge is purple. You must use the same manufacturers mask and cartridge; do not mix!
What else can I help you with?
What is the best type of saw to use for cutting laminate flooring?
The best type of saw to use for cutting laminate flooring is a jigsaw with a fine-toothed blade.
What is the best type of grinder wood blade to use for cutting hardwoods?
A carbide-tipped blade is the best type of grinder wood blade to use for cutting hardwoods.
What must you do before using an air purifying respirator?
Before using an air purifying respirator, you must ensure that the respirator is properly fitted to your face, seals securely against your skin, and that the filters are correct for the type of contaminants present in the environment. Additionally, you should perform a user seal check to ensure proper fit before each use.
Can anyone use a respirator?
No, not everyone can use a respirator. Only individuals who have been properly trained to select, use, and maintain respirators should do so. Additionally, individuals must undergo medical evaluations to ensure they are physically able to wear a respirator.
What is the best type of cutting wheel for a grinder to use for cutting metal?
The best type of cutting wheel for a grinder to use for cutting metal is a reinforced abrasive wheel specifically designed for cutting metal. These wheels are made with materials that can withstand the high heat and pressure generated during metal cutting, providing a clean and efficient cut.
What is the best type of grinder metal cutting wheel to use for cutting through tough materials?
The best type of grinder metal cutting wheel to use for cutting through tough materials is a diamond cutting wheel. Diamond cutting wheels are known for their durability and ability to cut through hard materials such as metal, concrete, and stone with precision and efficiency.
What is the best respirator cartridge to use for pesticides?
chemical cartridge respirtator
What kind of respirator would you use for grain bin dust?
If it is only the dust you are worried about then a particulate respirator will provide protection, i.e. a N95 up to a P100. That is if there is enough oxygen in the area that you can use an air purifying respirator. If not then you would need to use supplied air. Supplied air is often used during the fumigation process where a cartridge respirator may not provide adequat protection.
What is the best type of grinder wood cutting wheel to use for cutting through hardwood materials?
The best type of grinder wood cutting wheel to use for cutting through hardwood materials is a carbide-tipped wood cutting wheel. Carbide-tipped wheels are durable and can easily cut through tough hardwoods with precision and efficiency.
What type of router bit should I use to cut plywood effectively?
For cutting plywood effectively, use a straight router bit with a carbide cutting edge. This type of bit is ideal for clean and precise cuts in plywood.
What is the best type of grinder metal cutting blade to use for cutting through tough materials?
For cutting through tough materials, the best type of grinder metal cutting blade to use is a diamond blade. Diamond blades are known for their durability and ability to cut through hard materials like metal, concrete, and stone with precision and efficiency.
What type of router bit for drill should I use for cutting precise and clean edges on my woodworking project?
For cutting precise and clean edges on your woodworking project, you should use a straight router bit with a sharp cutting edge.
