The point gap on a Yamaha YL1, a classic two-stroke motorcycle, is typically set to 0.35 mm (0.014 inches). Properly adjusting the point gap is crucial for optimal ignition timing and engine performance. Always refer to the owner's manual or service manual for specific adjustments and maintenance recommendations. Regular checks can help ensure the bike runs smoothly and efficiently.
The magneto point gap on a 2hp Yamaha outboard is 0.35mm, or 0.014".
service manual here http://www.repairmanualclub.com/index.php?dlid=686
any good quality two stoke oil including outboard motor oil
The point gap on a Yamaha DT250 typically refers to the gap between the ignition points in the magneto system, which should be set to approximately 0. points when the points are fully open. This gap is crucial for proper ignition timing and engine performance. Always refer to the specific service manual for your bike’s model year for the exact specifications.
what is the valve gap for a 1999 Yamaha woverine
Hello: The point gap on a DT125 is basically the same as all bikes//////.012" thru .016"///////.014 inches is a good place to set them at.....Good Luck****
The point gap on a 1975 Yamaha YZ80 is typically set to 0.016 inches (0.4 mm). This gap is crucial for proper ignition timing and the overall performance of the engine. It's important to check and adjust this gap to ensure optimal engine operation and prevent starting or running issues. Always refer to the specific service manual for the most accurate specifications.
The 1967 Yamaha YL1 typically uses about 10 ounces (approximately 300 ml) of fork oil per fork leg. It's important to check the owner's manual or service guide for specific recommendations, as variations may exist based on maintenance history or modifications. When changing fork oil, ensure to use the appropriate viscosity to maintain optimal performance.
Suggest you call a Yamaha dealer for info.
What is the spark plug gap for a 2006 yamaha ttr 125?
the gap is .030"
The suggested spark plug gap on a 1997 Yamaha YZ 80 is .036. That is the standard gap for most Yamaha small engines.