no it wont the only other one that will fit is off the banshee
Chat with our AI personalities
As long as its Not a yz model blaster.
going by all the other yamahas raptor banshee blaster i would say its a 40 tooth Yamaha always goes with a 13 tooth front sprocket and a 40 rear
all blasters are interchangeable not true in 2003 the added hydro brakes and a new hood. the axle will fit tho but . most of the parts are interchangable execpt the rear axle and carrier and the breaks and hood
Very carefuly
Stock raptor 250s willl make around 17-20 hp at the rear wheels.
The best way to remove the rear axle on a Polaris Hawkeye is to spray it with PB blaster. After waiting several hours or a day, simply pull the axle outward.Ê
unscrew it. take it off.
The VIN (Vehicle Identification Number) for the Yamaha Raptor 80 is located on the right hand side of the bike. The VIN is stamped into the lowest part of the frame just below the rear brake pedal.
Factory rating is 37 at the rear wheels, with factory tires.
a ford 9" rear bolts right intrust me i did it it came out great
There are many different ways you can tell if the rear axle has gone out on a Yamaha 350 ATV. If there is a grinding sound or a slipping when trying to put the vehicle in gear, those may be an indication of this issue.
PB blaster and a sludge hammer. If that doesnt work, heat it up and sledge hammer.