0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why would there be no brake lights?
bad bulbs, bad fuse, or brake light switch on the metal arm of your brake pedal under your dash.
Why would a car grind when accelerating?
It could possibly be that your brake pads or brake shoes have worn down to the metal
What is the function of a sheet metal brake?
A sheet metal brake is useful for a sheet metal machine. You need a brake on the machine that helps to bend the metal into the correct angle that you wish to bend it.
What does it mean when your brakes make noise?
It can mean that your brake shoes are "glazed" and this isn't really a problem. It can also mean that excessive brake dust is making the noise and this isn't really a problem. It can mean that your brake shoes are worn and now metal-on-metal contact is beginning to happen and you should get a brake job immediately before you destroy your brake rotors. It can also mean the brake pads may have built in "squealers" and they are letting you know the pads are worn down and it is time for replacement.
What would cause a loud pop then metal to metal sound at front wheel when driving?
Probably your brake pad came off.
What would cause constant squeaking in the rear on a 2007 focus?
rubber on brake line worn bend hanger so its not metal on metal
What would cause the scrapping sound near driver side front tire only it's not the brake itself and the tire is fine but car squeeks and makes metal to metal scrapping sound at low speeds or braking?
If the brake pads are not worn out check the backing plate. It is the thin metal plate behind the brake rotor, sometimes it will get bent and rub on the brake rotor.
What is the function of the sheet metal?
A sheet metal brake is useful for a sheet metal machine. You need a brake on the machine that helps to bend the metal into the correct angle that you wish to bend it.
When did the first coin come out?
When Chuck Norris kicked a piece of metal.
Can sheet metal be bent by hand?
It can not. Generally use press brake to bend sheet metal. Press brake has 3 kinds of series. Manual press brake by foot, mechnical press brake, hydraulic press brake.
My breaks squeek and their no metal to metal grinding and i need to know where to put in the brake fluid on a 98 Plymouth breeze?
If brakes are squeeking and you are low on brake fluid Probably time for new linings or pads, I would check them before just adding brake fluid. Brake fluid resevior should be located on firewall on driver's side
Car makes a loud grinding sound when you brake?
"Could be many things, but from my experience, brake pads might be worn thru and are scraping metal to metal. If so brake pads need replacing. If brake pads are worn thru and not replaced, scoring damage could be accumulating on the brake disc." It could also be due to a warped or damaged router that would be the big metal disk. but if replacing your brake pads doesn't fix the problem replacing your router will more then likely take care of the noise.
