Amps (current) times volts = watts. so watts divided by volts = current (Amps). i.e.- 0.5 Amps.
To find the current drawn, use the formula: Current (I) = Power (P) / Voltage (V). Plugging in the values, I = 795 W / 120 V = 6.625 A. Therefore, the appliance draws approximately 6.625 A of current when plugged into a 120 V outlet.
Yes, a space heater can be plugged into any outlet. Depending on what else is drawing current on the circuit will govern whether the circuit will trip or not. If the heater is plugged in and the circuit does not trip it can be left plugged as long as it is needed. If the heater trips after a few seconds, then try another outlet.
Yes, a 230V appliance can be plugged into a 230V outlet as long as the outlet is compatible with the appliance's plug type and configuration. It's important to ensure that both the voltage and plug type match to avoid damaging the appliance or causing a safety hazard.
Yes, the appliance can be plugged into a normal household electrical outlet in the United States since such outlets typically provide 120 volts. Ensure that the outlet is on its own circuit to avoid overloading it with other devices, which can cause tripping the circuit breaker.
a shorted out outlet can cause a backfeed on the white wire, an open circuit on the white wire with and electrical appliance plugged in to an outlet can cause the same type of backfeed
The fuse is what restricts how much current you can draw from an outlet. If you have the wrong fuse you can draw more power than intended from an outlet - but only if the appliance plugged in can use it up. To get too much power out of an outlet, with a suitable appliance plugged in, then you also have to have a higher voltage in the outlet. And for that to happen, something has to be seriously wrong higher upp in the supply chain.
To find the current drawn, use the formula: Current (I) = Power (P) / Voltage (V). Plugging in the values, I = 795 W / 120 V = 6.625 A. Therefore, the appliance draws approximately 6.625 A of current when plugged into a 120 V outlet.
Assume this is a ground fault circuit interrupter (GFCI) outlet. The GFCI looks for current that is flowing to ground, in a manner that could result in electrical shock to a user. The appliance that is being plugged in could be defective, the wiring connected to the load side of the GFCI may be incorrect, or the GFCI outlet could be defective. Try using another appliance. If the GFCI holds, the first appliance is most likely the cause.
Yes, a space heater can be plugged into any outlet. Depending on what else is drawing current on the circuit will govern whether the circuit will trip or not. If the heater is plugged in and the circuit does not trip it can be left plugged as long as it is needed. If the heater trips after a few seconds, then try another outlet.
how many amps flow thruogh a 2400 watt appliance plugged into a 120 volt outlet
Yes, a 230V appliance can be plugged into a 230V outlet as long as the outlet is compatible with the appliance's plug type and configuration. It's important to ensure that both the voltage and plug type match to avoid damaging the appliance or causing a safety hazard.
No, sorry but you fried it. Any voltage higher than an appliance is rated will do major damage.
Yes, the appliance can be plugged into a normal household electrical outlet in the United States since such outlets typically provide 120 volts. Ensure that the outlet is on its own circuit to avoid overloading it with other devices, which can cause tripping the circuit breaker.
An appliance cable or "flex" outlet is a type of electrical outlet which is NOT a "socket outlet" to take plugs for appliances so that they can be plugged and un-plugged. An appliance cable or "flex" outlet has terminals inside it. The terminals allow the wires in an appliance cable or "flex" to be connected to the household wiring in a building. The household wiring comes from the building's main electrical power panel, which carries the main circuit breakers. The circuit breakers are fitted to protect the household wiring from catching on fire if any circuit is overloaded. Such appliance cable or "flex" outlets also have strain-relief clips. A strain-relief clip helps to prevent the cable from being yanked out of the outlet if the appliance gets moved away from the wall where the outlet is installed. Such outlets, with terminals inside and strain-relief clips, are used for fixed appliances, such as ranges or dryers, which should never have to be un-plugged during normal use of the appliance by the user.
The current in a hair dryer plugged into an outlet in the US (120V) is typically around 10-12.5 Amps. In Europe (230V), it would be around 5-6 Amps.
Electrical testing meters can definitely aid in the troubleshooting process of an appliance. This is because if it reads "no voltage" when plugged into the outlet, then the fuse or circuit is at fault, not the appliance.
a shorted out outlet can cause a backfeed on the white wire, an open circuit on the white wire with and electrical appliance plugged in to an outlet can cause the same type of backfeed