0
What else can I help you with?
What would the result be if a recovery cylinder were filled with liquid and allowed to warm up?
The result of filling a recovery cylinder with iquid refrigerant and allowing it to warm up is that the heat of the container would warm the refrigerant inside of it. The refrigerant would, as a result expand.
How can you remove liquid from a r22 cylinder?
To remove liquid from an R22 cylinder, you need to first ensure the cylinder is upright and not tilted. Connect a recovery machine to the cylinder and open the liquid valve. Allow the recovery machine to pull out the liquid until only vapor remains in the cylinder.
What is the density of liquid the mass of a graduated cylinder was 28g. 30 ml of liquid poured into a cylinder?
The difference between the weights (grams) of the empty cylinder, and with the liquid gives you the weight of the liquid. Divide that by 30 to get the density of the liquid in g/ml
When measuring with a graduated cylinder you pour liquid into a what?
When measuring with a graduated cylinder, you pour the liquid into the cylinder to a precise level. Read the measurement at the bottom of the meniscus, which is the curved surface of the liquid. Be sure to read the measurement at eye level for accuracy.
What instrament is used to measure liquid?
the most accurate would be a graduated cylinder but there are beakers and other things that aren't as accurate
What would the result be if a recovery cylinder were filled with liquid and allowed to warm up?
The result of filling a recovery cylinder with iquid refrigerant and allowing it to warm up is that the heat of the container would warm the refrigerant inside of it. The refrigerant would, as a result expand.
How can you remove liquid from a r22 cylinder?
To remove liquid from an R22 cylinder, you need to first ensure the cylinder is upright and not tilted. Connect a recovery machine to the cylinder and open the liquid valve. Allow the recovery machine to pull out the liquid until only vapor remains in the cylinder.
What would the result be if a recovery cylinder were filled with liquid refrigerant and allowed to warm up?
If a recovery cylinder were filled with liquid refrigerant and allowed to warm up, the liquid refrigerant would begin to vaporize as it absorbs heat energy from the surroundings. As the temperature of the refrigerant increases, its pressure would also rise due to the temperature-pressure relationship defined by the refrigerant's specific properties. Eventually, the refrigerant would reach a point where it transitions completely into a vapor state, filling the recovery cylinder with refrigerant vapor.
Why did you measure the mass of the graduated cylinder at the beginning of the experiment and not after the liquid was poured out?
The mass of the graduated cylinder was measured at the beginning of the experiment to determine the empty weight of the container before any other substances were added to it. This allowed for the accurate calculation of the mass of the liquid poured into the cylinder by subtracting the initial empty mass from the total mass measured after the liquid was added.
Where do you measure the volume of a liquid on a graduated cylinder?
You measure the volume of a liquid on a graduated cylinder at the meniscus, which is the curved surface of the liquid.
What is the density of liquid the mass of a graduated cylinder was 28g. 30 ml of liquid poured into a cylinder?
The difference between the weights (grams) of the empty cylinder, and with the liquid gives you the weight of the liquid. Divide that by 30 to get the density of the liquid in g/ml
Why is it necessary to know the mass of the graduated cylinder in an order to find the mass of the liquid?
Knowing the mass of the graduated cylinder allows you to subtract it from the total mass of the cylinder and the liquid, giving you the mass of the liquid alone. This step is important for accurately determining the mass of the liquid without the container's contribution.
What is a graduated cylinder measured in?
measured with a graduated cylinder
Why use a graduated cylinder for 100ml of liquid?
A graduated cylinder is used for measuring liquid volumes accurately. By using a graduated cylinder, you can precisely measure out 100ml of liquid ensuring the correct volume is dispensed. The markings on the cylinder allow for easy reading and accurate measurement.
How do you measure a liquid?
To measure the volume of a liquid, you can use a graduated cylinder.
When measuring with a graduated cylinder you pour liquid into a what?
When measuring with a graduated cylinder, you pour the liquid into the cylinder to a precise level. Read the measurement at the bottom of the meniscus, which is the curved surface of the liquid. Be sure to read the measurement at eye level for accuracy.
Where is the least dense liquid found in a graduated cylinder?
The least dense liquid is found at the bottom of the graduated cylinder, because the less dense it is, the farther it will go down in th graduated cylinder.
