By stronger, we need to define the loading conditions of the rod or pipe. The strength of a rod or pipe is typically evaluated with axial, transverse (bending), and torsion loads.
With the same diameter and the same material, a solid rod is stronger than a hollow pipe. However, with the same weight and material, the hollow pipe is stronger than a solid rod.
Because a hollow pipe is lighter than a solid rod at the same diameter, the hollow pipe would have a larger diameter in order to match weights with the solid rod and a larger diameter rod or pipe is stronger than a smaller diameter one.
i think you are looking for 316 stainless steel pipe.
8 inch lead pipe? plastic pipe? steel pipe? square? triangular?
How much does each steel pipe weigh?
A steel pipe is stronger assuming it is made of the same material and has the same thickness.
Most of the strength of a circular section comes from the outer diameter fibers where area and inertia are the highest. So a tube is more efficient than a solid in terms of strength to weight ratio. However, if you ignore the weight benefit of a tube, the solid steel is stronger of the same diameter. If you need a certain weight, then you can make the tube stronger by increasing its diameter over a solid section of equal weight.
yes you certainly can mate
For a given outer diameter, the solid shaft is stronger, but it weighs more.For a given weight, the hollow shaft is stronger because it has a bigger diameter.due to less weight & less bending moment..............the resultant bending moment for a solid pipe is much larger than for a hollow one because of their weight difference
Carbon Steel pipe is stronger than stainless steel pipe as there is more iron in the carbon steel. However, the application depends on the purpose the pipe is being installed. Stainless is of course capable of being sanitized and therefore can be used for food and pharmaceutical uses. Carbon Steel (black pipe) is stronger and cheaper but not sanitary.
"Solid Steel" would not be a pipe- it would be a rod. Weight of pipe will vary depending on the thickness of the wall of the pipe.
Seamless steel pipe is a hollow cross-section, no seams around the long bar of steel. Steel hollow sections with a large pipe for transporting fluids, such as the transportation of oil, natural gas, gas, water and some solid materials, pipes, etc.. Seamless steel pipe is a hollow cross-section, no seams around the long bar of steel. Steel hollow sections with a large pipe for transporting fluids, such as the transportation of oil, natural gas, gas, water and some solid materials, pipes, etc.. and it can be divided into <a href="http:/ steel pipe</a> and welded steel pipe. Seamless hollow sections, widely used as pipeline fluids, such as transportation of oil, natural gas, gas, water and some solid materials, pipes and so on. Compared to other steel and solid steel bar, the same torsional strength in bending, lighter, is an economic cross-section steel, widely used in the manufacture of structural parts and mechanical parts, such as drill pipe, automotive drive shafts, bicycle rack and construction using steel scaffolding with a steel pipe manufacturing ring parts Can improve material utilization, simplify the manufacturing process, saving materials and processing time, it has been widely used to make steel. china East Pipe Co., Ltd., is a steel tube suppliers http://www.eaststeelpipe.com/ instituted in 1979 in china weifang , East Pipe Industry Co., Ltd., affords manufacture , R&D , export , import of sprinkler fire fighting system , East Pipe Industry Co., Ltd., is one of the best provider of anti-corrosion pipes and steel fire sprinkler pipe in China . The factory has more than 30 years dependable technology research experience of sprinkler fire fighting system depend on annual production capacity of 500,000 tons .
assuming it's hollow. 10.68*ID*(OD-ID)
how to calculate unit weight of hollow pipe
Pipe is hollow, it needs to be solid when being bent. This can be with the aid of a solid mandrel, spring or even sand on the inside. With the pipe now a solid and if the bend radius isn't to sharp there should be no puckers when bending.
A pipe is most commonly defined as a hollow cylinder or tube used to conduct a liquid, gas, or finely divided solid.