answersLogoWhite

0

PULL UP THE TOILET AND SEE IF THERE IS A MINOR BLOCKAGE. SOMETIMES THOSE NEW WAX RINGS WITH THE FUNNEL REALLY BLOW IT. WATER PRESSURE MIGHT NOT BE GOOD. TAKE A SREW DRIVER AND OPEN IT UP COUNTERCLOCK WISE.(TAKE THE CAP OFF THE STOP) IF YOUR SIPHONE JET IS WALL MOUNTED YOU BETTER CALL A PLUMBER. TAKING IT OFF THE WALL IS NO PROBLEM. PUTTING IT BACK IS. YOU CAN ONLY SNUG THE LAST BOLT OR THE FIXTURE WILL BUST.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you increase suction in older toilet?

Toilets do not function on suction, they flush by using gravity to empty the water from the tank into the bowl, thereby causing the S-trap built into the toilet bowl to siphon. The only way to improve the flush is to cause it to flush with more water (which sometimes helps, sometimes doesn't), or buy a siphon-jet or other power assisted toilet. An older toilet may be to plugged up with mineral deposits to improve the flush much, the amount of deposit depends on what's in your water, how often you clean the toilet, and other factors beyond your control.


Can I place a shower where a toilet currently is and visa versa and are waste sizes the same and if so can I connect new stack to existing in attic?

The toilet is 3 or 4 inch and the shower is 1 1/2 or 2 inch. You could reduce the toilet to 2 inch, but it would never flush correctly or be of much use. The current toilet drain has no trap in that section because one isn't needed. The toilet itself is the trap. If you are using existing waste lines, they should already be connected to the vent stack. If you are adding lines, connecting to the existing stack is fine as long as it is above the last drain.


How can you implement a queue using stacks efficiently?

To implement a queue using stacks efficiently, you can use two stacks. One stack is used for enqueueing elements, and the other stack is used for dequeueing elements. When dequeueing, if the dequeue stack is empty, you can transfer elements from the enqueue stack to the dequeue stack to maintain the order of elements. This approach allows for efficient implementation of a queue using stacks.


How do you siphon fuel out of the tank when there is a siphon block and your pump isn't working?

You definitely do not want to do it as our fathers and grandfathers did--using a garden hose, sucking it and then quickly releasing the hose. That led to lung damage and other health issues.


When did the damage stop using the stack?

The damage from using the stack stopped when the company implemented new safety measures.


How do you siphon your gas out of your Honda Prelude?

To siphon gas from a Honda Prelude, you can use a siphon pump or a length of tubing. First, ensure the vehicle is on a level surface and the engine is off. Insert one end of the tubing into the gas tank and the other into a container, then create a vacuum by sucking on the tubing or using a siphon pump until the fuel begins to flow. Always follow safety precautions, as gasoline is flammable and hazardous.


Is it possible to implement stack and queues using linkes list?

Yes it is possible to implement stack and queue using linked list


What does a bidet toilet do and how does it differ from a regular toilet?

A bidet toilet is a type of toilet that includes a water spray nozzle for cleaning after using the toilet. It differs from a regular toilet in that it provides a more thorough and hygienic cleaning experience compared to using toilet paper.


How does buoyancy allow a toilet to work?

Buoyancy allows a toilet to work by using the principle of buoyant force to maintain water levels in the tank and bowl. When the tank is filled with water, the buoyant force keeps the water level constant. When the toilet is flushed, the release of water from the tank creates a siphon effect, pulling waste and water from the bowl, which is then refilled to the original level due to buoyancy.


How does the push button toilet flush mechanism work?

The push button toilet flush mechanism works by using a system of levers and valves. When the button is pressed, it lifts a lever that opens a valve, allowing water to flow from the tank into the bowl. This sudden influx of water creates a siphon effect, pulling waste and water out of the bowl and into the sewer system.


Explain The merits of using a deque to implement a stack in data structure?

Explain The merits of using a deque to implement a stack in data structure


What exactly does a bidet toilet do and how does it differ from a traditional toilet?

A bidet toilet is a type of toilet that includes a water spray nozzle for cleaning after using the toilet. It differs from a traditional toilet in that it provides a more thorough and hygienic cleaning experience compared to using toilet paper alone.