60Hz generator can be operated at 50Hz as along as certain conditions are met.Basically the problem is that there is a max flux achieveble in any given machine and EA = K(pie)(w) the max allowable E changes when the speed is changed.
Vltage must be derated to 50/60 or 83.3% of its original value. jUst the opposite effect happen when 60Hz generator is operated at 50Hz.
pain ee yako...
Yes an adapter can be made. You must keep in mind that the US generator's speed is set for 60 Hz generation. The frequency of a generator is governed by the RPM of the engine. If the generator has speed control on it, it will have to be turned down so that the frequency meter reads 50 Hz.
Yes but some details must be right. The generator must produce the power at the right voltage for the appliances, and it also must be capable of supplying enough power for the appliances.
A generator does not use amps it generates amperage. To answer this question the generators voltage must be stated.
Can be done. Yes it is done all the time. But first you need to find out how many amps the house load is. Then you need to have it hooked up with a proper transfer switch. Don't try the plug in the dryer trick. That will get you into some VERY big problems. When something goes wrong. Have it done correctly or don't do it.
To answer this question the voltage of the pump must be stated.
the generator will have a timing circuit to turn on and off the coil at 60 times per second. you must change the values of the timing circuit to achieve this. definitely need an o-scope and the manufacturer's schematics to accomplish this
Yes an adapter can be made. You must keep in mind that the US generator's speed is set for 60 Hz generation. The frequency of a generator is governed by the RPM of the engine. If the generator has speed control on it, it will have to be turned down so that the frequency meter reads 50 Hz.
BPSK Modulation can be done by using a multiplier. Digital data must be multiplied with the carrier frequency. In matlab simulink use a multiplier block to one input apply a sinusoidal generator & to the other a Pulse generator
Yes but some details must be right. The generator must produce the power at the right voltage for the appliances, and it also must be capable of supplying enough power for the appliances.
A generator's frequency is dictated by the power system frequency, and the number of poles in the generator. For 60 Hz power and a generator designed with two poles, the generator must turn at 3600RMPs (60 Hz * 60 seconds / minute). The magnetic flux is what induces the current in on the output winding. Spinning a synchronous generator faster or slower is not done to control the magnetic flux. The field winding voltage is varied to control this, and in turn control the output of the generator.
By definition a synchronous generator must be synchronous. If it is not "locked in" it is not a synchronous generator, but an induction machine.
that will depend on the contract and the course of business. Many contracts specify that any changes must be in writing. Others allow oral modifications as a matter of course.
To answer this question the voltage of the generator must be given.
generator lockout relay is a relay that the output of other relays energize this relay and its out put use for tripping of generator. this relay must be reset manually
Yes. If a building is located within an established historical district you must apply for a permit before making any modifications to a building. Historical commissions have the authority to make you reverse any unauthorized modifications and restore the structure to its original condition.Yes. If a building is located within an established historical district you must apply for a permit before making any modifications to a building. Historical commissions have the authority to make you reverse any unauthorized modifications and restore the structure to its original condition.Yes. If a building is located within an established historical district you must apply for a permit before making any modifications to a building. Historical commissions have the authority to make you reverse any unauthorized modifications and restore the structure to its original condition.Yes. If a building is located within an established historical district you must apply for a permit before making any modifications to a building. Historical commissions have the authority to make you reverse any unauthorized modifications and restore the structure to its original condition.
A generator does not use amps it generates amperage. To answer this question the generators voltage must be stated.
That makes modifications more difficult, for example, adding a digit.