Typically, a 2.5 to 4 power scope. You may need an offset mount, since the 94 ejects through the top.
It looks like any mount that will clamp to the top rail is good. No gunsmithing is necessary to mount a scope.
Hello: Weaver offers a scope base for the Marlin Model 512 Slugmaster, contact Weaver for a complete package. Thanks side scope mount (Weaver 10M)
What do you mean by "gun mount". Do you want to display it on a wall? Are you referring to putting a scope on it?
what kind of scope would fit a model 94 30 30 serial number 5003009
Your Winchester model 25 rifle will take any size scope that you see fit to use as long as the rifle is drilled and tapped for scope use.If your rifle comes with a 3/8in.milled receiver rail then you must use that size scope ring bases.I recommend that a good 4X power scope is all that is needed for the effective range of .22cal rimfire ammo.
If you would be kind enough to include your serial number,then we would be able to date your Model 70 Winchester for you.
Winchester 32 spl 170gr
Scope mounts and sights are not categorized as gun parts under US federal law and they can be shipped from the US to Canada. You can check eBay or any one of the US supply houses, Midway MidWest, Bass pro shops. I wouldn't scope a top ejecting lever action so I can't recommend a particular brand.
Assuming that your scope is a 3x9x40 scope,then medium height rings will do the job.If it is a 3x9x50mm scope,then you will need a set of high scope rings.
Yes, you can put a scope on a Coast to Coast Model 320 single-shot .22 rifle. You'll need to use a scope mount that fits the rifle's specifications, typically a 3/8-inch dovetail mount. A compact rimfire scope with low magnification, such as a 3-9x40mm or a fixed power of around 4x, would work well for this type of firearm. Be sure to check the eye relief and overall compatibility with your setup.
.45 Long Colt.
You will have to have it checked by a gunsmith.