answersLogoWhite

0

Check if the water supply line valve underneath the sink is on or off .."On" will be turning counterclockwise ,If not look for the hot water heater and make sure the water supply valve is turned on.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Physics

Is - 5 degrees cold?

It depense if you have a jacket and a hat you should be fine


What ice formed from fine mist?

The ice that forms from fine mist is known as frost. It forms when water vapor in the air condenses directly into ice. Frost tends to form on surfaces such as grass, leaves, and car windows during cold and clear nights.


Why does a bathtub faucet come out with really hot water and really cold water and you can't get it to the intended temperature?

This is likely due to a problem with the faucet's mixing valve, which controls the ratio of hot and cold water. It could be malfunctioning or experiencing mineral buildup, preventing it from properly mixing the water. Replacing the mixing valve or cleaning it may help resolve the issue.


How do you fix a slow cold water flow in your Kenmore 80 series washer?

First, check for any clogs in the cold water inlet hose and ensure it is not kinked or twisted. If the hose is clear, the issue may be with a faulty water inlet valve or sediment build-up in the valve. You can try cleaning the valve or replacing it if necessary.


Why is the cold water so slow to fill washing machine?

You probably have a clogged filter. The filter is a made of wire mesh that is molded to the approximate dimensions of a thimble. Becuase the wire mesh of the filter is very fine, it is difficult to clean. Order a replacement from the manufacturer. Be sure to shut the water off and remove the hose. There are sometimes small screen filters on the hoses, and always a screen filter on the infeed to the washer where the hose connects. Check the filter. Even a little bit of build-up can cause severe issues with fill time. My washer was taking close to an hour to fill on cold, and now fills in 2 minutes since changing the filter.