BMX Bicycles

Doing a crummy job is easy enough, but doing a good job of it is quite hard. You'd need to disassemble it down to bare frame first, a challenge in itself.

On top of that, whatever paint you can apply at home is nowhere near as durable as the factory paint, so it will scuff, chip and flake easily.

there were invented 300 years ago

Go on you tube and search how to finger bmx.

If u want to learn how much a mach bike weighs, I'll tell u this, it's faster than the acro bike. Only that u can do more stuff on an acro bike

Scott Clark (BMX rider) is 55 years old. He was born on June 8, 1962.

it depends on the workers you have, but a grundo can be made fairly quickly.

The fastest BMX bike available typically has a high-tensile steel or chromoly frame, lightweight components, aerodynamic design, and thin, low-profile tires to reduce rolling resistance. However, speed can also be affected by the rider's skill and strength.

While it's certainly not the first shock ever made (various sprung designs have been in use since Victorian times and have been used since the first days of mountain bikes back in the 1960s), you nevertheless have a very rare and interesting shock on a classic mountain bike. Look after it very well, because in the near future bike museums may be willing to offer you money for it.

A good beat to freestyle to is Lil Wayne ft Cory Gun 6 foot 7 foot

there are 3 steps to jumping on a bmx bike:

1) compress- put your weight over the handlebars

2) quickly lean back over your seat

3) after doing this, your front wheel will lift off of the ground. to lift the back wheel up, scoop your opposite foot out and up in a "j" motion while your front wheel is in the air

once you are able to get both wheels in the air, continue practicing and eventually your bunny hops will become higher and higher

Yes you can use a motor cross helmet for bmx riding i actually recommend it but that's my opinion

the front tires will rub in corners... I'm trying to find the minimum lift I need that will look right now. I'm in the same boat with same truck

Mostly in China, although their ultra high end pro BMX bikes are made here by private frame builders.

the fork gyro (if have) and stem and mostly important the headset

1996

they vary from weight to how strong they are. The website danscomp.com or staff-bmx.com are good websites that are reliable to buy bikes of

America

It's a U-brake

No. The Verde Theory is a BMX bike for riding on a track. A Gyro would only come on a Freestyle bike made for trick riding.

It's a standard 1 1/8" threadless "Aheadset" type of headset. Nothing brand name.

There are self adhesive cable guides available, but they're not strong enough to be used as an end point for a cable sleeve. If you want something like that it'd have to be bonded in with the appropriate glue, and that's the kind of work that takes some skill if you want to avoid damaging the frame.

Depends on where you are riding it. If you stay in bikeparks and backyards it's OK, but if you ride it in traffic you have to have brakes.

It's just a short length of cable, maybe 5" or so, that's used to connect the arms of the brake together.

Yes.

Riding on flat tyres run the risk of damaging both rim and tyre, the bike will roll poorly, and the tyre may even come off the rim, making the rim skid and slide all over the place - not a good thing.