Browning Firearms

,

Value depends on year of manufacture, condition and a few other factors. If you would like, you can contact me at 417-830-5588 and I will help you. I am a collector, not a dealer. Thanks. Jim jrreeves@prodigy.net

100-1000 USD or more depending on specifics

yes

Call Browning with the serial number.

50-460 USD or so

Yes they did. I have one. It is a jap made light 12 but they did make one. It is a quail killer. Perfect for the woods and a joy to shoot.

No way to answer without a detailed description.

Yes

Your serial number indicates that your Browning light weight auto-5 shotgun was made in the year 1971.

100-1000 depending on specifics.

You do not want to try this. Find a qualifed Browning gunsmith.

0T2125 was made in 1944

your browning sweet sixteen was made in 1965.assuming that you have a standard grade in 80% condition it would be worth about 625.00 dollars,if it has a vent rib barrel it would be worth 875.00 dollars. if the shotgun is in better condition say 90% the value would go up another 100-250 dollars.

You will need to include a serial number to have your question answered.

a part of the sn

The manner in which you have asked your question almost guarantees it can not be answered with any degree of accuracy. You do not provide anything beyond the caliber and type of action. You need to give the overall condition, serial number, finish, sights, accessories, box, papers, any engraving, etc.. You might be in the 100-1000 USD and up range depending on specifics.

None of my references show a Model 999 made by Ruger as a rifle, shotgun, pistol or revolver. Are you sure it is a Ruger, and that 999 is the model number? Please provide some additional info (lie what type of firearm, description) and we will do our best to get you an answer.

1. Remove the magazine from firearm.

2. Disengage the safety, pull slide rearward and insure chamber is empty.

3. With slotted screw driver of proper size carefully remove the forward screw located on the rear sight bar. The rear screw is for elevation adjustment of the sight. The screw is screwed into the rear of the barrel assembly. Remove rear sight bar. You may want to add a little gun grease under the bar upon reassembly. TW25b by MilComm products is a good one.

4. With slotted screw driver of proper size carefully unscrew the large screw located under the barrel and in front of the trigger guard. Complete removal of the screw may be impossible and is in fact unnecessary. With this screw backed out adequately put the screw driver down and with one hand on the slide pull it rearward and with the other hand maneuver the barrel rearward and up off the frame. Place the barrel down taking care not to lose track of the barrel link cam pin which may fall out.

5. Carefully allow the slide to move forward taking care of the spring and spring guide that is between the rear of the slide and the frame post at the rear of the frame.

6. Assembly is reverse of disassembly. Take note of the position of the barrel link cam pin and how it fits into the slots on the frame sides when placing the barrel back onto the frame. Do not over-tighten the screws but be firm.

7. Except for the fact that this pistol has no way to lock the slide open, it could be adequately cleaned without taking it apart. I have often cleaned it while assembled but for a thorough job taking it apart, though not a must, is desirable.

500 USD or so

A Browning Hi Power

Could it be that your browning hi-power is marked 70C19171? If it is then it was made in 1970.

You must add if this gun is a trap model,skeet model,standard model,golden clays model,sporting clays model before we can give you a correct price.Also include the condition of your browning as this will help quit a bit.

Browning Bolt Rifle.

50-500 usd

That would be a toss up between the very first one and the very last one.