Chrysler 200

The 2012 Chrysler 200 has front wheel drive.

The drivetrain warranty of the 2015 Chrysler 200 is 5 yr./ 100000 mi..

The battery is in front of the driver side front tire inside the fender.

The 2011 Chrysler 200 is 15 ft. 11.7 in. (191.7 in.) long.

Up to 2014 it inside the left front wheel well. 2015 it is under the hood.

The 2014 Chrysler 200 has a V6 engine.

The ground clearance of the 2012 Chrysler 200 is 0 ft. 6.1 in. (6.1 in.).

The gross weight of the 2014 Chrysler 200 is 4600 lbs..

Behind a removable plastic panel in the front of the drivers side wheel well. Removing the drivers side front tire will make access easier. After the panel is removed you will see the battery and can remove the battery cables (negative cable first) then the battery hold down bracket. Now you can slide the battery out.

The 2012 Chrysler 200 has 16 valves.

If you're raising it from the front and leaving the rear wheels on the ground, just some good tire straps. No alterations need to be made to the vehicle in this mode. If you plan on raising the rear of the vehicle, and leaving the front axle on the ground, you'll need to install locking hubs on the front and keep them unlocked while the vehicle is in tow. The 200 is a transverse, front engine, front-wheel-drive car, meaning it has a transaxle, and there is no driveshaft separating the transmission from the differential.

The 2015 Chrysler 200 has a drag coefficient of 0.27 Cd.

The 2015 Chrysler 200 has 52.8 in. of rear hip room.

The curb weight of the 2013 Chrysler 200 is 3402 lbs..

The 2011 Chrysler 200's engine produces 173 hp @ 6000 rpm.

The 2014 Chrysler 200 runs on flex-fuel (FFV).

The 2012 Chrysler 200 is 6 ft. 0.5 in. (72.5 in.)1 one-touch power windows wide.

The 2012 Chrysler 200 has an inline 4 engine.

In a 2011 Chrysler 200, the cigarette lighter fuse is typically located in the fuse box under the dashboard on the driver's side. The specific fuse number for the cigarette lighter is usually 13, but it's always best to consult the owner’s manual for the exact location and specifications. If the cigarette lighter is not functioning, checking this fuse is a good first step in troubleshooting the issue.

To change the time on the Chrysler 200 dash clock, start by turning on the ignition without starting the engine. Then, press the "Settings" button on the touchscreen or use the physical buttons, depending on your model. Navigate to "Clock" or "Time," and adjust the hours and minutes using the appropriate controls. Finally, save your changes, and the new time should now be displayed on the dash clock.

The 2011 Chrysler 200 S does not have a traditional dipstick for checking the transmission fluid, as it uses a sealed transmission system. To check the fluid level, you typically need to access the transmission through a fill plug located on the transmission case. It's advisable to consult the owner’s manual or a professional mechanic for assistance, as checking the fluid level requires specific procedures to ensure accuracy.

The Chrysler Sebring and Chrysler 200 are both mid-size sedans, but they differ in design, features, and performance. The Sebring, produced from 2001 to 2010, has a more traditional look and was available in both sedan and convertible body styles, while the 200, introduced in 2010 and produced until 2017, features a more modern and refined design with updated technology and safety features. Additionally, the 200 offers improved engine options and handling compared to the Sebring, reflecting advancements in automotive engineering. Overall, the Chrysler 200 is considered a more contemporary and improved successor to the Sebring.

In the 2011 Chrysler 200, the fuse for the sunroof is located in the interior fuse box, which is typically found beneath the dashboard on the driver's side. Specifically, it is usually in the second row of fuses and is labeled as "Sunroof" or "Roof." Always refer to the owner's manual for the exact location and amperage of the fuse for accurate identification.