Jeep CJ

304 w/ 2 bbl carb.

Possibly but you will have twice the amperage for sure. So the 2 batteries will run the trolling motor far longer. My guess is yes, they will last longer than just one battery. That is an educated guess.

The wiper motor is located behind the dash pad in front of the driver,yes but didn't have to take the dash pad off! Just drop the windshield onto the hood and there it is! The linkage is accessible through a slot in the windshield frame....

That is a loaded question. I could be all night. Go to a book store (my favorite is "Books A Million") and look in a "Chiltons" or "Motors" manual for your respective model year. It will have everything you will want to know. There should also be "Jeep" books there that will have very specific information.

The transfer case of a 1985 Jeep CJ7 typically requires a gear oil, specifically 80W-90 or 75W-90, depending on the climate and usage conditions. It's essential to check the owner's manual for specific recommendations, as the transfer case may vary based on the type of transmission and any modifications. Always ensure the oil meets the required specifications for optimal performance and protection.

The wiring harness for a 1986 Jeep CJ Wrangler is generally not interchangeable with the 1987 model due to differences in electrical systems and components introduced in 1987. While some harnesses may appear similar, variations in connectors, wiring layouts, and additional features could lead to compatibility issues. It's best to use the specific wiring harness designed for the 1987 model to ensure proper functionality.

To change the rotors on a 1981 Jeep CJ5, first, lift the vehicle and remove the front wheels. Next, take off the brake caliper and bracket, then remove the old rotor by unscrewing any retaining screws if applicable. Install the new rotor, reattach the caliper and bracket, and finally, replace the wheels. Be sure to pump the brake pedal to ensure proper caliper engagement before driving.

To replace the ball joints on an '85 Jeep CJ7, first safely lift and support the vehicle, then remove the front wheels. Next, detach the brake calipers and rotors, and remove the axle shafts if necessary. Use a ball joint press or a hammer to remove the old ball joints from the knuckles, then install the new ball joints, ensuring they are properly seated. Reassemble the components, torque everything to specifications, and check for proper alignment before driving.

The towing capacity of a Jeep CJ varies depending on the specific model and year, but generally, it ranges from about 2,000 to 3,500 pounds. It's important to consult the owner's manual or specifications for the exact towing capacity of a particular CJ model, as factors like engine type and modifications can influence this capability. Always ensure you're adhering to safety guidelines and weight limits when towing.